Hi all, Did anyone help me to resolve this problem , it block me a long time ,Thank you very much I have a toolchain that is big endian ARM, so I want to use the toolchain with the binary, not the source code , can we have some method to finish this work in yocto ? I still have no clue about this . I have done the below steps: 1.modify MACHINE=qemux86 to MACHINE=qemuarm 2.modify the file " external-csl-toolchain_2008q3-72.bb" add a line " SRC_URI = "file://gcc-4.4.1.tar.bz2"", the gcc-4.4.1.tar.bz2 is the source code of the arm big endian toolchain 3.then I face the some problem like this website "https://lists.yoctoproject.org/pipermail/poky/2011-February/003809.html" ,then I add a line " LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302"" ,in file external-csl-toolchain_2008q3-72.bb to fix this problem 4.now I got the below log : NOTE: Resolving any missing task queue dependencies NOTE: multiple providers are available for virtual/arm-none-linux-gnueabi-g++ (external-csl-toolchain, gcc-cross) NOTE: consider defining a PREFERRED_PROVIDER entry to match virtual/arm-none-linux-gnueabi-g++ NOTE: multiple providers are available for runtime linux-libc-headers-dev (linux-libc-headers, linux-libc-headers-yocto, linux-libc-headers-yocto-nativesdk) NOTE: consider defining a PREFERRED_PROVIDER entry to match linux-libc-headers-dev NOTE: Preparing runqueue NOTE: Executing SetScene Tasks NOTE: Executing RunQueue Tasks NOTE: Running task 206 of 1360 (ID: 455, /home/kyle/poky-edison-6.0/meta/recipes-core/meta/external-csl-toolchain_2008q3-72.bb, do_install) NOTE: package external-csl-toolchain-2008q3-72-r1: task do_install: Started ERROR: Function 'do_install' failed (see /home/kyle/ccc/tmp/work/armv5te-none-linux-gnueabi/external-csl-toolchain-2008q3-72-r1/temp/log.do_install.9579 for further information) ERROR: Logfile of failure stored in: /home/kyle/ccc/tmp/work/armv5te-none-linux-gnueabi/external-csl-toolchain-2008q3-72-r1/temp/log.do_install.9579 Log data follows: | NOTE: make -e MAKEFLAGS= install_root=/home/kyle/ccc/tmp/work/armv5te-none-linux-gnueabi/external-csl-toolchain-2008q3-72-r1/image install | make: *** No rule to make target `install'. Stop. | ERROR: oe_runmake failed | ERROR: Function 'do_install' failed (see /home/kyle/ccc/tmp/work/armv5te-none-linux-gnueabi/external-csl-toolchain-2008q3-72-r1/temp/log.do_install.9579 for further information) NOTE: package external-csl-toolchain-2008q3-72-r1: task do_install: Failed ERROR: Task 455 (/home/kyle/poky-edison-6.0/meta/recipes-core/meta/external-csl-toolchain_2008q3-72.bb, do_install) failed with exit code '1' ERROR: '/home/kyle/poky-edison-6.0/meta/recipes-core/meta/external-csl-toolchain_2008q3-72.bb' failed kyle@ubuntu:~/ccc$
After I comment the line "#inherit libc-common" and "#inherit libc-package" the error become the below : Log data follows: | DEBUG: SITE files ['endian-little', 'common-linux', 'common-glibc', 'bit-64', 'x86_64-linux', 'common'] | NOTE: Running /home/ccc/poky/edison-6.0-build/tmp/work-shared/gcc-4.6.2+svnr175454-r17/gcc-4_6-branch/configure --build=x86_64-linux --host=x86_64-linux --target=arm-none-linux-gnueabi --prefix=/home/ccc/poky/edison-6.0-build/tmp/sysroots/x86_64-linux/usr --exec_prefix=/home/ccc/poky/edison-6.0-build/tmp/sysroots/x86_64-linux/usr --bindir=/home/ccc/poky/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/bin/armv5te-none-linux-gnueabi.gcc-cross-initial --sbindir=/home/ccc/poky/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/bin/armv5te-none-linux-gnueabi.gcc-cross-initial --libexecdir=/home/ccc/poky/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/libexec/armv5te-none-linux-gnueabi.gcc-cross-initial --datadir=/home/ccc/poky/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/share --sysconfdir=/home/ccc/poky/edison-6.0-build/tmp/sysroots/x86_64-linux/etc --sharedstatedir=/home/ccc/poky/edison-6.0-build/tmp/sysroots/x86_64-linux/com --localstatedir=/home/ccc/poky/edison-6.0-build/tmp/sysroots/x86_64-linux/var --libdir=/home/ccc/poky/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/lib/armv5te-none-linux-gnueabi.gcc-cross-initial --includedir=/home/ccc/poky/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/include --oldincludedir=/home/ccc/poky/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/include --infodir=/home/ccc/poky/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/share/info --mandir=/home/ccc/poky/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/share/man --disable-silent-rules --with-libtool-sysroot=/home/ccc/poky/edison-6.0-build/tmp/sysroots/x86_64-linux --with-local-prefix=/home/ccc/poky/edison-6.0-build/tmp/sysroots/qemuarm/usr --with-newlib --without-headers --disable-shared --disable-threads --disable-multilib --disable-__cxa_atexit --enable-languages=c --enable-target-optspace --program-prefix=arm-none-linux-gnueabi- --with-sysroot=/home/ccc/poky/edison-6.0-build/tmp/sysroots/qemuarm --with-build-sysroot=/home/ccc/poky/edison-6.0-build/tmp/sysroots/qemuarm --disable-libmudflap --disable-libgomp --disable-libssp --disable-libquadmath --enable-decimal-float=no --with-float=soft --enable-nls --enable-__cxa_atexit | checking build system type... x86_64-pc-linux-gnu | checking host system type... x86_64-pc-linux-gnu | checking target system type... arm-none-linux-gnueabi | checking for a BSD-compatible install... /usr/bin/install -c | checking whether ln works... yes | checking whether ln -s works... yes | checking for a sed that does not truncate output... /bin/sed | checking for gawk... gawk | checking for x86_64-linux-gcc... gcc | checking for C compiler default output file name... | configure: error: in `/home/ccc/poky/edison-6.0-build/tmp/work/armv5te-none-linux-gnueabi/gcc-cross-initial-4.6.2+svnr175454-r17/gcc-4_6-branch/build.x86_64-linux.arm-none-linux-gnueabi': | configure: error: C compiler cannot create executables | See `config.log' for more details. | ERROR: oe_runconf failed | ERROR: Function 'do_configure' failed (see /home/ccc/poky/edison-6.0-build/tmp/work/armv5te-none-linux-gnueabi/gcc-cross-initial-4.6.2+svnr175454-r17/temp/log.do_configure.17470 for further information) NOTE: package gcc-cross-initial-4.6.2+svnr175454-r17: task do_configure: Failed ERROR: Task 1271 (/home/ccc/poky/meta/recipes-devtools/gcc/gcc-cross-initial_4.6.bb, do_configure) failed with exit code '1' ERROR: '/home/ccc/poky/meta/recipes-devtools/gcc/gcc-cross-initial_4.6.bb' failed So , I have two questions 1.how can I fix this problem use the source code of toolchain to build our system? 2.how can I use my binary toolchain to build my system ?Did anyone to these things before ? -----Original Message----- From: Richard Purdie [mailto:richard.pur...@linuxfoundation.org] Sent: 2012年3月31日 23:44 To: Wangdawei (Sivan) Cc: p...@yoctoproject.org Subject: Re: [poky] The problem of using the external toolchain On Sat, 2012-03-31 at 09:55 +0000, Wangdawei (Sivan) wrote: > The reason is that I want to use the binary toolchain I have own in > yocto, and I don’t have the source code of the toolchain , then I do > the steps below: > > 1. add a line in local.conf like this TCMODE ?= "external-csl2008q3" > 2.modify the file tcmode-external-csl2008q3.inc, change > EXTERNAL_TOOLCHAIN = "/opt/toolchain-be8/armeb-linux-gnueabi" to refer > to where my binary toolchain stored > 3. comment the line “#SRC_URI = "file://SUPPORTED"” in file > “external-csl-toolchain_2008q3-72.bb”,because we don’t have the source > code ,so I think the SRC_URI maybe will be NULL > > When I do this , but it failed , below is the log I have got: > > NOTE: package binutils-cross-2.21.1a-r0: task do_configure: Started > > ERROR: Function 'do_configure' failed > (see > /home/ccc/poky-second/build/tmp/work/i586-none-linux/binutils-cross-2.21.1a-r0/temp/log.do_configure.5085 > for further information) > > ERROR: Logfile of failure stored > in: > /home/ccc/poky-second/build/tmp/work/i586-none-linux/binutils-cross-2.21.1a-r0/temp/log.do_configure.5085 > > Log data follows: > > | DEBUG: SITE files ['endian-little', 'common-linux', 'common-glibc', > | 'bit-64', 'x86_64-linux', 'common'] > | configure.ac:32: error: Please use exactly Autoconf 2.64 instead of > 2.68. > | config/override.m4:12: _GCC_AUTOCONF_VERSION_CHECK is expanded > from... > | configure.ac:32: the top level > | > autom4te: /home/ccc/poky-second/build/tmp/sysroots/x86_64-linux/usr/bin/m4 > failed with exit status: 1 > | NOTE: > Running > /home/ccc/poky-second/build/tmp/work/i586-none-linux/binutils-cross-2.21.1a-r0/binutils-2.21.1/configure > --build=x86_64-linux --host=x86_64-linux > --target=i586-none-linux > --prefix=/home/ccc/poky-second/build/tmp/sysroots/x86_64-linux/usr > --exec_prefix=/home/ccc/poky-second/build/tmp/sysroots/x86_64-linux/usr > > --bindir=/home/ccc/poky-second/build/tmp/sysroots/x86_64-linux/usr/bin/i586-none-linux > > --sbindir=/home/ccc/poky-second/build/tmp/sysroots/x86_64-linux/usr/bin/i586-none-linux > > --libexecdir=/home/ccc/poky-second/build/tmp/sysroots/x86_64-linux/usr/libexec/i586-none-linux > > --datadir=/home/ccc/poky-second/build/tmp/sysroots/x86_64-linux/usr/share > > --sysconfdir=/home/ccc/poky-second/build/tmp/sysroots/x86_64-linux/etc > > --sharedstatedir=/home/ccc/poky-second/build/tmp/sysroots/x86_64-linux/com > > --localstatedir=/home/ccc/poky-second/build/tmp/sysroots/x86_64-linux/var > > --libdir=/home/ccc/poky-second/build/tmp/sysroots/x86_64-linux/usr/lib/i586-none-linux > > --includedir=/home/ccc/poky-second/build/tmp/sysroots/x86_64-linux/usr/include > > --oldincludedir=/home/ccc/poky-second/build/tmp/sysroots/x86_64-linux/usr/include > > --infodir=/home/ccc/poky-second/build/tmp/sysroots/x86_64-linux/usr/share/info > > --mandir=/home/ccc/poky-second/build/tmp/sysroots/x86_64-linux/usr/share/man > --disable-silent-rules > --with-libtool-sysroot=/home/ccc/poky-second/build/tmp/sysroots/x86_64-linux > --with-sysroot=/home/ccc/poky-second/build/tmp/sysroots/qemux86 > --program-prefix=i586-none-linux- --disable-install-libbfd > --disable-werror > --enable-poison-system-directories --enable-nls ... > > | checking build system type... x86_64-pc-linux-gnu checking host > system > | type... x86_64-pc-linux-gnu checking target system type... > | i586-none-linux-gnu checking for a BSD-compatible install... > | /usr/bin/install -c checking whether ln works... yes checking > whether > | ln -s works... yes checking for a sed that does not truncate > output... > | /bin/sed checking for gawk... gawk checking for x86_64-linux-gcc... > | gcc checking for C compiler default output file name... > | configure: error: in > `/home/ccc/poky-second/build/tmp/work/i586-none-linux/binutils-cross-2.21.1a-r0/binutils-2.21.1/build.x86_64-linux.i586-none-linux': > | configure: error: C compiler cannot create executables See > | `config.log' for more details > | ERROR: oe_runconf failed > | ERROR: Function 'do_configure' failed (see > | /home/ccc/poky-second/build/tmp/work/i586-none-linux/binutils-cross-2. > | 21.1a-r0/temp/log.do_configure.5085 for further information) > NOTE: package binutils-cross-2.21.1a-r0: task do_configure: Failed > We can see the toolchain it checked is also the x86_64-linux-gcc , not > the toolchain I assigned “EXTERNAL_TOOLCHAIN = > "/opt/toolchain-be8/armeb-linux-gnueabi"” This is for the *build* system (i.e. the system you are compiling on) so its likely correct. It then goes on to look at the target of "i586-none-linux-gnu" which sounds wrong given you appear to have an armeb toolchain? I suspect you need to target a big endian arm machine rather than MACHINE=qemux86 which I suspect you're currently using? Cheers, Richard _______________________________________________ poky mailing list p...@yoctoproject.org https://lists.yoctoproject.org/listinfo/poky
external-csl-toolchain_2008q3-72.bb
Description: external-csl-toolchain_2008q3-72.bb
tcmode-external-csl2008q3.inc
Description: tcmode-external-csl2008q3.inc
_______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto