On Tue, 2012-04-03 at 16:43 -0700, kishore.k.bo...@intel.com wrote: > From: Kishore Bodke <kishore.k.bo...@intel.com> > > Update the README file with instructions to build > with pvr graphics driver. > > Signed-off-by: Kishore Bodke <kishore.k.bo...@intel.com> > --- > meta-cedartrail/README | 41 +++++++++++++++++++++++++++++++++++++++-- > 1 files changed, 39 insertions(+), 2 deletions(-) > > diff --git a/meta-cedartrail/README b/meta-cedartrail/README > index 295e9ff..f482cca 100755 > --- a/meta-cedartrail/README > +++ b/meta-cedartrail/README > @@ -52,10 +52,23 @@ common metadata shared between BSPs) e.g.: > yocto/meta-intel \ > yocto/meta-intel/meta-cedartrail \ > > -To enable the cedartrail layer, add the cedartrail MACHINE to local.conf: > +To enable the cedartrail layer that supports Power VR graphics, > +add the cedartrail MACHINE to local.conf: > > MACHINE ?= "cedartrail" > > + > +Power VR Graphics user-space driver binaries are covered by a > +"Intel Free Distribution Binary License". The build of this driver > +can be enabled by adding the following line to the local.conf file: > + > +LICENSE_FLAGS_WHITELIST += "license_cdv-pvr-driver_1.0" > + > +To enable the layer that does not support Power VR graphics > +add the following to the local.conf file: > + > + MACHINE ?= "cedartrail-nopvr" > + > You should then be able to build a cedartrail image as such: > > $ source oe-init-build-env > @@ -85,7 +98,7 @@ Under Linux, insert a USB flash drive. Assuming the USB > flash drive > takes device /dev/sdf, use dd to copy the live image to it. For > example: > > -# dd if=core-image-sato-cedartrail-20120105232035.hddimg of=/dev/sdf > +# dd if=core-image-sato-cedartrail-20120403210525.hddimg of=/dev/sdf > # sync > # eject /dev/sdf > > @@ -109,3 +122,27 @@ the syslinux boot: prompt, or the boot: prompt contains > strange > characters), try doing this first: > > # dd if=/dev/zero of=/dev/sdf bs=1M count=512 > + > +Miscellaneous Notes > +==================== > + > +Video and Music Samples > +----------------------- > +This BSP includes recipes to download Ogg format video and > +music files that can be played-back with the Video and music players > +included in the sato images. The sample files are installed in > +/home/Music and /home/Videos directories. > + > + > +Adding Glxgears to image > +------------------------- > +Glxgears can be added to the generated image by adding "debug-tweaks" > +option to the extra image features variable in the default local.conf > +before building the BSP.
I think the thing that adds glxgears is tools-testapps and not debug-tweaks. You have tools-testapps below which is probably why it works, but you might want to verify that and change the README text if so. Tom > + > +e.g. to add Glxgears, locate the following line in local.conf > +EXTRA_IMAGE_FEATURES = "debug-tweaks" > + > +and change above line to.. > + > +EXTRA_IMAGE_FEATURES = "debug-tweaks tools-testapps" _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto