On 12-04-10 04:40 PM, Chris Tapp wrote:
I think this is a summary of the steps needed to reconfigure the kernel,based
on the instructions in the 6.0.1 dev manual:
1) bitbake linux-yocto -c clean
2) bitbake linux-yocto -c menuconfig
3) bitbake linux-yocto -c compile -f
4) bitbake linux-yocto
However, the bzimage in tmp/deploy/images is the same as the one that I had
before I executed the above. I'm not sure if the md5sum is the same (will check
next time round the loop), but it certainly doesn't seem to pick up the new
configuration that I'm generating within menuconfig.
If I use 'cleanall' in step 1 (as shown in the manual) then I do get a new
image, but at the expense of having to download the kernel branch again (even
with a DL_DIR set). Can I get away with just using 'clean' if I do something
else as well ?
This is likely:
https://bugzilla.yoctoproject.org/show_bug.cgi?id=2256
Which is still pending resolution.
Cheers,
Bruce
Chris Tapp
opensou...@keylevel.com
www.keylevel.com
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
