2012/5/1 Khem Raj <raj.k...@gmail.com>:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> On 05/01/2012 07:21 AM, Frans Meulenbroeks wrote:
>
>>
>> Tried to use yocto-bsp with the standard 7.0 setup (where there is
>> a poky-denzil-7.0-build dir adjacent to the soruce dir). yocto-bsp
>> when invoked complained with: IOError: [Errno 2] No such file or
>> directory:
>> '/home/frans/poky-denzil-7.0/scripts/../build/conf/bblayers.conf'
>>
>
> Did you use the environment script (oe-init-build-env) to initialize
> your build env ?
>
Yes.
I used the quick start guide to make sure I did not miss any step.
I did:
$ wget
http://downloads.yoctoproject.org/releases/yocto/yocto-1.2/poky-denzil-7.0.tar.bz2
$ tar xjf poky-denzil-7.0.tar.bz2
$ source poky-denzil-7.0/oe-init-build-env poky-denzil-7.0-build
as suggested by the manual.
In order to have yocto-bsp work without problem it might have been
better to do something like
source poky-denzil-7.0/oe-init-build-env poky-denzil-7.0/build
Not sure if the yocto-bsp script could be improved or the manual.
Frans
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
