On 06/01/2012 10:53 AM, jfabernathy wrote: > On 06/01/2012 01:44 PM, Darren Hart wrote: >> >> On 06/01/2012 10:39 AM, jfabernathy wrote: >>> On 06/01/2012 01:01 PM, Darren Hart wrote: >>>> On 06/01/2012 08:45 AM, jfabernathy wrote: >>>>> On 05/31/2012 03:41 PM, Darren Hart wrote: >>>>>> On 05/31/2012 11:54 AM, jfabernathy wrote: >>>>>>> On 05/31/2012 02:13 PM, Darren Hart wrote: >>>>>>>> On 05/31/2012 09:11 AM, jfabernathy wrote: >>>>>>>>> Using a DN2800MT (Marshalltown) Intel board, I'm testing the >>>>>>>>> meta-cedartrail using edison branch and noticed an issues with the >>>>>>>>> serial console. >>>>>>>>> >>>>>>>>> The cedartrail.conf in the machine directory has the following >>>>>>>>> statements: >>>>>>>>> >>>>>>>>> SYSLINUX_OPTS = "serial 0 115200" >>>>>>>>> SERIAL_CONSOLE = "115200 ttyS0" >>>>>>>>> APPEND += "console=ttyS0,115200 console=tty0" >>>>>>>>> >>>>>>>>> However, when the image booted, I had no serial console on ttyS0. I >>>>>>>>> checked /etc/inittab and noticed that the following line existed: >>>>>>>>> >>>>>>>>> S:2345:respawn:/sbin/getty 115200 ttyS3 >>>>>>>>> >>>>>>>>> I changed the ttyS3 to ttyS0 and then I have a serial console on the >>>>>>>>> next reboot. So it appears the override in the .conf file is not >>>>>>>>> working. Also I only have the console from getty, and not the kernel >>>>>>>>> logging console. >>>>>>>>> >>>>>>>>> Anyone have a solution?? >>>>>>>>> >>>>>>>>> If this is considered a bug I can put it on bugzilla. >>>>>>>> Lets make sure your environment is what we expect. Please provide the >>>>>>>> output of: >>>>>>>> >>>>>>>> $ bitbake core-image-minimal -e | grep SERIAL_CONSOLE= >>>>>>>> >>>>>>>> If it is not "115200 ttyS0" then it is getting overwritten somewhere >>>>>>>> either in your config, or possibly by an inappropriate selection of an >>>>>>>> assignment operator (=, ?=, etc.) in edison. >>>>>>> okay now I'm confused. while the cedartrail.conf file has the >>>>>>> following: >>>>>>> SYSLINUX_OPTS = "serial 3 115200" >>>>>>> SERIAL_CONSOLE = "115200 ttyS3" >>>>>>> APPEND += "console=ttyS3,115200 console=tty3" >>>>>>> >>>>>>> >>>>>>> The output of the bitbake command you suggested above gives: >>>>>>> jim@ubuntu-x64:~/poky/build$ bitbake core-image-minimal -e | grep >>>>>>> SERIAL_CONSOLE= >>>>>>> >>>>>>> # SERIAL_CONSOLE=115200 ttyS0 >>>>>>> SERIAL_CONSOLE="115200 ttyS0" >>>>>>> jim@ubuntu-x64:~/poky/build$ >>>>>>> >>>>>>> So is the bitbake command showing the results before the cedartrail.conf >>>>>>> options take affect?? >>>>>> variable assignments can be tricky, and are not the easiest things to >>>>>> track down. I suggest looking through your configured layers and looking >>>>>> for all the SERIAL_CONSOLE assignments using ttyS3 and ttyS0 and see if >>>>>> you can determine what is overriding your cedartrail.conf setting. >>>>>> >>>>> What I found out is the only variable that matters for login console in >>>>> my situation is SERIAL_CONSOLE because I have to use grub and the boot >>>>> from hard drive method because my image can't be put on a USB Flash for >>>>> some reason. So I manually have to edit the grub.cfg file as documented >>>>> on the wiki "How Do I" section of putting Yocto on a hard drive. Adding >>>>> console=ttyS0,115200 on the linux statement takes care of the boot >>>>> console. >>>> I believe this is a manual process currently. Please open an enhancement >>>> in bugzilla for your specific situation and I'll incporporate into the >>>> larger boot process and image revamp we're doing for 1.3. >>>> >>> I'll make the entry. >>>>> So the question is has there been any thought about automating the >>>>> choice of boot loader and the parameters that are needed or optional? >>>>> In the case of meta-cedartrail, the cedartrail.conf assumes syslinux is >>>>> the boot loader. When I could use a USB Flash key, creating a boot >>>>> device was a trivial dd statement. Because I have to use a hard drive >>>>> now, I have to do a number of manual steps. Or is there a way to create >>>>> a boot-able hard drive with syslinux so the cedartrail.conf parameters >>>>> are all that is needed to adjust? >>>> This is all good feedback to consider as we work through making more >>>> universally bootable images. This is becoming a hot topic as people are >>>> using Yocto in more and more situations and as things like EFI become >>>> more commonplace. >>>> >>>> There is no reason you can't just dd (have a look at >>>> scripts/contrib/ddimage) the image to a hard disk instead of a usb >>>> stick. You may need a USB to SATA adapter for your host (this is what I >>>> use). If you have a USB port, you could just use the install option. >>> This script does not eliminate the boot error I get with syslinux on USB >>> flash keys. I noticed the script is not in edison but is in denzil, so >>> I got it there and tried to run it against an image created with >>> edison. I still get the same boot error I get with dd, which is >>> understandable since that's what the script uses. Not sure if this is a >>> size issue because my image is over a 1GB. I'm guessing this this will >>> still fail on a hard drive with the dd'ing of the .hddimg, but I'll test >>> it anyway. >> Sorry, ddimage wasn't meant to fix the issue, just as a slightly more >> convenient/safe wrapper around dd. >> >> I'm not familiar with the error you are seeing with the live image. Can >> you point me to the thread or the bug?
> Well this boot error issue seems to be USB Key related because I just > did the ddimage script on a edison core-image-sato image using the > .hddimg file and it worked correctly on a hard drive. This was a 1.2GB > image. Now I'll have to add in the parameters that give you more free > disk space now that I'm testing with a real hard drive. > > The readme in most of the x86 BSP directory in meta-intel talk about if > you get boot errors to: > > dd if=/dev/zero of=/dev/sdf bs=1M count=512 > > I have not found this to work. Maybe it's a count size issue. I always > use 512, but maybe it should be 4096 for a 4GB USB key. > What is the boot error? -- Darren Hart Intel Open Source Technology Center Yocto Project - Linux Kernel _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto