On 6/21/12 10:25 AM, Elvis Dowson wrote:
Hi,
      I just updated my yocto repos and tried a fresh build.

There are two errors, see below:

My bblayers.conf file looks like this:

# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
# changes incompatibly
LCONF_VERSION = "4"

BBFILES ?= ""
BBLAYERS ?= " \
   /tool/yocto/poky/meta \
   /tool/yocto/poky/meta-yocto \
   /tool/yocto/meta-openembedded/meta-oe \
   /tool/yocto/meta-xilinx \
   "

And when I run the bitake core-image-minimal;bitbake meta-toolchain  I get the 
following errors:

$ bitbake core-image-minimal;bitbake meta-toolchain;
Pseudo is not present but is required, building this first before the main build
WARNING: Unable to get checksum for python-numpy SRC_URI entry config.h: file 
could not be found           | ETA:  00:00:49
WARNING: Unable to get checksum for python-numpy SRC_URI entry numpyconfig.h: 
file could not be found
WARNING: 
/tool/yocto/meta-openembedded/meta-oe/recipes-connectivity/networkmanager/networkmanager_0.9.2.0.bb:
 it is recommended to set SYSTEMD_PACKAGES as <existing-package>-systemd
WARNING: /tool/yocto/poky/meta/recipes-extended/lighttpd/lighttpd_1.4.30.bb: it is 
recommended to set SYSTEMD_PACKAGES as <existing-package>-systemd
Parsing recipes: 100% 
|####################################################################################|
 Time: 00:00:37
Parsing of 1186 .bb files complete (0 cached, 1186 parsed). 1524 targets, 40 
skipped, 0 masked, 0 errors.
WARNING: BBPATH references the current directory, either through an empty 
entry, or a '.'.
         This is unsafe and means your layer configuration is adding empty 
elements to BBPATH.
         Please check your layer.conf files and other BBPATH settings to remove 
the current working directory references.

The above is a warning, it is a configuration problem with one or more layer.conf file within a layer. But it's a warning, the build will continue.

ERROR:  OE-core's config sanity checker detected a potential misconfiguration.
     Either fix the cause of this error or at your own risk disable the checker 
(see sanity.conf).
     Following is the list of potential problems / advisories:

     PATH contains '.' or '', which will break the build, please remove this.

The above is an error. Your shell environment's "PATH" is broken. You have either '' (blank) or '.' within your path.

Run the following in your shell: echo "${PATH}"

If you see something like:

/usr/bin:/bin:~/bin:.

It's the '.' that is the problem. Rewrite your path by removing the '.' item.. (similarly if it contains '::' or ends with ':' that is the blank problem)

--Mark

ERROR: Execution of event handler 'check_sanity_eventhandler' failed
ERROR: Command execution failed: Exited with 1

Summary: There were 5 WARNING messages shown.
Summary: There were 3 ERROR messages shown, returning a non-zero exit code.
Pseudo is not present but is required, building this first before the main build
Loading cache: 100% 
|######################################################################################|
 ETA:  00:00:00
Loaded 1523 entries from dependency cache.
Parsing recipes: 100% 
|####################################################################################|
 Time: 00:00:07
Parsing of 1186 .bb files complete (1184 cached, 2 parsed). 1524 targets, 40 
skipped, 0 masked, 0 errors.
WARNING: BBPATH references the current directory, either through an empty 
entry, or a '.'.
         This is unsafe and means your layer configuration is adding empty 
elements to BBPATH.
         Please check your layer.conf files and other BBPATH settings to remove 
the current working directory references.
ERROR:  OE-core's config sanity checker detected a potential misconfiguration.
     Either fix the cause of this error or at your own risk disable the checker 
(see sanity.conf).
     Following is the list of potential problems / advisories:

     PATH contains '.' or '', which will break the build, please remove this.
ERROR: Execution of event handler 'check_sanity_eventhandler' failed
ERROR: Command execution failed: Exited with 1

Summary: There was 1 WARNING message shown.
Summary: There were 3 ERROR messages shown, returning a non-zero exit code.


Best regards,

Elvis Dowson
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto



_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto

Reply via email to