Hi Bruce, Yes,its arm board. Yes, I have verified and kernel bootline is properly passed to the kernel by bootloader.
Best Regards, Om Prakash Pal -----Original Message----- From: Bruce Ashfield [mailto:bruce.ashfi...@windriver.com] Sent: Monday, June 25, 2012 6:38 PM To: Om Prakash PAL Cc: Khem Raj; yocto@yoctoproject.org Subject: Re: [yocto] Porting of specific Kernel/Driver into yocto. On 12-06-25 08:53 AM, Om Prakash PAL wrote: > Hi Khem, > I have build core-image-core. but still this Error: > ======================================================> > 11.165466] EXT3-fs (mmcblk0p1): mounted filesystem with writeback data > mode > [ 11.172668] VFS: Mounted root (ext3 filesystem) on device 179:1. > [ 11.179260] Freeing init memory: 316K > INIT: version 2.88 booting > Error Cannot open /dev/tty0: No such device or address > mknod: /dev/console: File exists > > =========================================================> > > I have set SERIAL_CONSOLE="115200 ttyAMA2" then why its taking /dev/tty0 ?. I've lost some of the context on the board you are working with, but from ttyAMA2, I'm assuming it is an arm board. Have you verified that your bootloader can pass the kernel bootline properly to the kernel ? It is (unfortunately) fairly common that it isn't properly passed. If you modify your configuration to have a built in command line with your configuration, you may be able to get better setup to debug the problem. Cheers, Bruce > please help. > > Best Regards, > Om Prakash Pal > _______________________________________ > From: Khem Raj [raj.k...@gmail.com] > Sent: Friday, June 22, 2012 11:18 AM > To: Om Prakash PAL > Cc: Gary Thomas; yocto@yoctoproject.org > Subject: Re: [yocto] Porting of specific Kernel/Driver into yocto. > > On Thu, Jun 21, 2012 at 10:37 PM, Om Prakash PAL > <omprakash....@stericsson.com> wrote: >> >>>> and then console got stuck. >>> >>>> What do you have SERIAL_CONSOLE set to in your configuration? >>> >>> I have set SERIAL_CONSOLE="115200 ttyAMA2". As we are using ttyAMA2 for >>> console. >> >>> What is your target device? Do you really have /dev/ttyAMA2 serial port??. >> >> Yes, I have /dev/ttyAMA2 serial port. > > Can you try using say poky/master and generate root file system and > try that out ? > another option is to try core-image-core > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto