Validated on real hardware: U-Boot 2012.04.01 (Jun 29 2012 - 13:48:03)MPC83XX
Reset Status: Software Hard, External/Internal Soft, External/Internal Hard CPU: e300c3, MPC8315E, Rev: 1.2 at 400 MHz, CSB: 133.333 MHz Board: Freescale MPC8315ERDB Rev 1.0 I2C: ready DRAM: 128 MiB (DDR2, 32-bit, ECC off, 266.667 MHz) Flash: 8 MiB NAND: 32 MiB PCIE0: No link PCIE1: No link In: serial Out: serial Err: serial Net: eTSEC0, eTSEC1 Hit any key to stop autoboot: 0 [YOCTO #943] Signed-off-by: Paul Gortmaker <paul.gortma...@windriver.com> --- [Resending, since the OE core changes this depended on are now in, and having an old u-boot _may_ also be the cause of YOCTO #2775 ] diff --git a/meta-yocto/conf/machine/mpc8315e-rdb.conf b/meta-yocto/conf/machine/mpc8315e-rdb.conf index fe4612a..aa1e5c3 100644 --- a/meta-yocto/conf/machine/mpc8315e-rdb.conf +++ b/meta-yocto/conf/machine/mpc8315e-rdb.conf @@ -7,6 +7,9 @@ require conf/machine/include/tune-ppc603e.inc KERNEL_IMAGETYPE = "uImage" +EXTRA_IMAGEDEPENDS += "u-boot" +UBOOT_MACHINE_mpc8315e-rdb = "MPC8315ERDB_config" + SERIAL_CONSOLE = "115200 ttyS0" MACHINE_FEATURES = "keyboard pci ext2 ext3 serial" @@ -17,6 +20,7 @@ PREFERRED_PROVIDER_virtual/kernel = "linux-yocto" PREFERRED_PROVIDER_virtual/xserver = "xserver-kdrive" XSERVER = "xserver-kdrive-fbdev" +PREFERRED_VERSION_u-boot ?= "v2012.04%" UBOOT_ENTRYPOINT = "0x00000000" KERNEL_DEVICETREE = "${S}/arch/powerpc/boot/dts/mpc8315erdb.dts" -- 1.7.9.7 _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto