On Thursday 26 July 2012 08:52:55 Edward Vidal wrote: > I added the line below to uEnv.txt based on Yi Zhao message. > bootcmd="mmc rescan 0; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000" > Now uEnv.txt is the following > mpurate=auto > > bootcmd="mmc rescan 0; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000" > dvimode="hd720 omapfb.vram=0:8M,1:4M,2:4M" > vram=16M > optargs="consoleblank=0" > console="tty0 console=ttyO2,115200n8" > The system boots and with the network setup i can ssh into the beagleboard. > checking dmesg I see the following. > > Unable to get DVI reset GPIO > omap-mcbsp.2: alias fck already exists > omap-mcbsp.3: alias fck already exists > OMAP DMA hardware revision 5.0 > > I tried id:3:initdefault still no display on beagleboard display. > Thanks any help will be appreciated :
Edward, Unfortunately I can't help much with your problem at this point, sorry about that - but could I ask you to keep this discussion as part of a single thread? It would make the discussion easier to follow. Thanks, Paul -- Paul Eggleton Intel Open Source Technology Centre _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
