2012/7/30 Bruce Ashfield <bruce.ashfi...@windriver.com> > On 12-07-30 10:20 AM, Frans Meulenbroeks wrote: > >> Hi Bruce, >> >> Thanks for your support. >> See below >> >> 2012/7/30 Bruce Ashfield <bruce.ashfi...@gmail.com >> <mailto:bruce.ashfield@gmail.**com <bruce.ashfi...@gmail.com>>> >> >> >> On Mon, Jul 30, 2012 at 7:33 AM, Frans Meulenbroeks >> <fransmeulenbro...@gmail.com >> <mailto:fransmeulenbroeks@**gmail.com<fransmeulenbro...@gmail.com> >> >> >> >> wrote: >> > Dear all, >> > >> > I finally managed to find time to pick up porting my project to >> denzil and >> > did encounter two issues that I wanted to report back: >> > >> > First is that I could not find what the preferred way was to >> disable a >> > kernel option in my bsp. >> > (the option concerned is CONFIG_PM). >> > Of course I can sed it out in do_configure but I'd hoped it could >> be simpler >> > (I have tried: >> > CONFIG_PM=n >> > in my config snippet) >> >> Putting: >> >> # CONFIG_PM is not set >> >> in your configuration fragment will turn off an option, the BSP >> guide has a >> "# CONFIG_SMP is not set" as an example for this. >> >> >> i thought it would and I have had this in my config too, but still it >> get switched on. Guess there is something else in my config that sets >> this. >> Will dive into this. >> >> >> > >> > Secondly a patch of mine does not seem to apply properly the >> first time, but >> > it does apply a second time. >> > This suggests a race between do_kernel_checkout and do_patch >> >> There shouldn't be any race .. if this doesn't work: >> >> addtask kernel_checkout before do_patch after do_unpack >> >> Then there are some serious problems with bitbake's task scheduling. >> >> If you didn't do a clean between the two runs, the second is >> attempting to continue >> the patching and you still aren't getting what you want. >> >> >> I did not do a clean inbetween. I figured patch would reattempt to patch >> and, since the file is there it would continue. >> >> The addtask line is there in one of the bitbake files. >> >> The odd thing is that the exact same thing builds fine under 3.0. >> Actually I was trying to move from 3.0 to 3.2 while stumbling on this. >> >> >> >> Without seeing what you've ported, or a work in progress I can't say >> exactly >> what is wrong, but your meta data is somehow wrong or completely >> missing. >> Have you set any meta or BSP SRCREVs explicitly ? >> >> >> I have put my work-in-progress in: >> >> https://www.dropbox.com/s/**h58h6pq5b0f4u2s/patchproblem.**tar.gz<https://www.dropbox.com/s/h58h6pq5b0f4u2s/patchproblem.tar.gz>vi >> >> you might want to edit conf/layer.conf as it has hardcoded paths. >> If I go to meta-syrcxx/conf/machine/**syrcxx.conf and set the preferred >> kernel version to 3.0 things build fine. >> Then I did set to 3.2 and it fails. >> Note that apart from a PR bump the files >> meta-syrcxx/recipes-kernel/**linux/linux-yocto_3.2.bbappend >> meta-syrcxx/recipes-kernel/**linux/linux-yocto_3.0.bbappend >> are identical (and I am just using files; so the same patches apply. >> > > You've got a couple of minor problems in the files. dmaengine is > incorrectly referenced for 3.2. I've attached a fix for that. The > other items are just warnings.. > > I have fixes to make that bad configuration reference a hard error, > with a message during do_patch that high lights the problem .. for > master. But in denzil, what you got is what I'd expect. > > Your max7311.patch also needs to be refreshed for 3.2, since it won't > apply as is. > > After the failure, I refreshed it as follows: > > > > bitbake -c devshell linux-yocto > > # in dev-shell: > > # already fixed in master, but denzil requires this: > > export GUILT_BASE=meta > > guilt next > links/files/max7311.patch > > guilt push -f > # resolve conflict in drivers/gpio/Makefile > > git add drivers/gpio/Makefile drivers/gpio/max7311.c > include/linux/max7311_gpio.h > > git clean -f > Removing drivers/gpio/Makefile.rej > > git tag standard/default/syrcxx_top > > guilt refresh > Patch links/files/max7311.patch refreshed > > > cp meta/patches/standard/default/**syrcxx/links/files/max7311.**patch > $your_layer_location/meta-**syrcxx/recipes-kernel/linux/**files > > > guilt push -a > Applying patch..links/files/axonbus-**remote.patch > Patch applied. > Applying patch..links/files/axonbus-**local.patch > Patch applied. > Applying patch..links/files/axon-**display.patch > Patch applied. > Applying patch..links/files/axon-**keyboard.patch > Patch applied. > Applying patch..links/files/axon-hwmon.**patch > Patch applied. > > # the series is now clean. > > I then cleaned linux-yocto and restarted, it configures and builds > after that (and eventually gets a build error, but that looks like an > issue with the code on the 3.2 kernel .. and is for someone else to > fix :) > > As for the CONFIG_PM, it's a Kconfig "feature" that is causing you > pain. You can't directly "access" (enable/disable) and option that > doesn't have help text, since the help text makes it "user visible" > and hence a configuration knob. (Don't blame me, I don't condone this, > but it is what it is). In this case you need to blast one of the > dependencies > to disable it. I turned off CONFIG_SUSPEND to get CONFIG_PM out of > my final.config. > > I inlined my three changes here, the last one is the patch refresh > for drivers/Kconfig, so it's not all that useful :) > > Cheers, > > Bruce > > Cool!
Thanks alot as for CONFIG_PM: I guessed soemthing like that was the case. Will peek into the rest of your email and test things tomorrow morning (11.30 pm here) Best regards, Frans > > ------------------------- > > > > diff -u syrcxx.cfg.orig syrcxx.cfg > --- syrcxx.cfg.orig 2012-07-30 16:02:20.374008667 -0400 > +++ syrcxx.cfg 2012-07-30 16:23:04.364007467 -0400 > @@ -304,7 +304,7 @@ > CONFIG_FORCE_MAX_ZONEORDER=11 > # CONFIG_CMDLINE_BOOL is not set > CONFIG_EXTRA_TARGETS="" > -CONFIG_PM=n > +# CONFIG_SUSPEND is not set > # CONFIG_SECCOMP is not set > CONFIG_ISA_DMA_API=y > # > yow-bashfiel-d2 [/home/bruc...inux/files]> diff -u syrcxx.scc.orig > syrcxx.scc > --- syrcxx.scc.orig 2012-07-30 15:16:22.374007496 -0400 > +++ syrcxx.scc 2012-07-30 15:17:01.284008083 -0400 > @@ -2,7 +2,7 @@ > > include cfg/usb-mass-storage.scc > include cfg/vfat.scc > -include cfg/dmaengine/dmaengine.scc > +include cfg/dmaengine.scc > > kconf hardware user-config.cfg > include user-patches.scc > yow-bashfiel-d2 [/home/bruc...inux/files]> diff -u max7311.patch.orig > max7311.patch > --- max7311.patch.orig 2012-07-30 15:18:55.963930827 -0400 > +++ max7311.patch 2012-07-30 15:33:02.192760856 -0400 > @@ -1,7 +1,7 @@ > Index: linux-2.6.38/drivers/gpio/**max7311.c > ==============================**==============================**======= > diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig > -index 3143ac7..ed49ee2 100644 > +index 4e04157..6703509 100644 > --- a/drivers/gpio/Kconfig > +++ b/drivers/gpio/Kconfig > @@ -23,7 +23,6 @@ config ARCH_REQUIRE_GPIOLIB > @@ -12,7 +12,7 @@ > menuconfig GPIOLIB > bool "GPIO Support" > depends on ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB > -@@ -137,6 +136,13 @@ config GPIO_MAX7300 > +@@ -200,6 +199,13 @@ config GPIO_MAX7300 > help > GPIO driver for Maxim MAX7301 I2C-based GPIO expander. > > @@ -27,17 +27,18 @@ > tristate "MAX7319, MAX7320-7327 I2C Port Expanders" > depends on I2C > diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile > -index bdf3dde..5e22ef0 100644 > +index 4e018d6..d9abdc2 100644 > --- a/drivers/gpio/Makefile > +++ b/drivers/gpio/Makefile > -@@ -41,3 +41,4 @@ obj-$(CONFIG_GPIO_RDC321X) += rdc321x-gpio.o > - obj-$(CONFIG_GPIO_JANZ_TTL) += janz-ttl.o > - obj-$(CONFIG_GPIO_SX150X) += sx150x.o > - obj-$(CONFIG_GPIO_VX855) += vx855_gpio.o > +@@ -62,3 +62,5 @@ obj-$(CONFIG_GPIO_WM831X) += gpio-wm831x.o > + obj-$(CONFIG_GPIO_WM8350) += gpio-wm8350.o > + obj-$(CONFIG_GPIO_WM8994) += gpio-wm8994.o > + obj-$(CONFIG_GPIO_XILINX) += gpio-xilinx.o > +obj-$(CONFIG_GPIO_MAX7311) += max7311.o > ++ > diff --git a/drivers/gpio/max7311.c b/drivers/gpio/max7311.c > new file mode 100644 > -index 0000000..c196fac > +index 0000000..7135a24 > --- /dev/null > +++ b/drivers/gpio/max7311.c > @@ -0,0 +1,594 @@ > > > ------------------------ > > > > > > >> BTW our board is a powerpc 8313e based board (modeled after mpc8313e-rds) >> >> One other thing I noticed; do_install seems to take quite some time; not >> sure why this is (haven't investigated). >> >> Best regards, Frans >> >> >> Cheers, >> >> Bruce >> >> > >> > Below is a log that illustrates this and demonstrates that things >> are ok the >> > 2nd time. >> > (btw I am also a little bit concerned on the command not found >> messages). >> > And of course any sugguestion for a fix is greatly appreciated. >> > >> > Best regards, Frans >> > >> > frans@frans-desktop:~/poky-**denzil-7.0-build$ bitbake >> virtual/kernel >> > Parsing recipes: 100% >> > >> |#############################**##############################** >> ##############################**#############################| >> > Time: 00:00:30 >> > Parsing of 829 .bb files complete (0 cached, 829 parsed). 1105 >> targets, 35 >> > skipped, 0 masked, 0 errors. >> > >> > OE Build Configuration: >> > BB_VERSION = "1.15.1" >> > TARGET_ARCH = "powerpc" >> > TARGET_OS = "linux-uclibc" >> > MACHINE = "syrcxx" >> > DISTRO = "poky" >> > DISTRO_VERSION = "1.2" >> > TUNE_FEATURES = "m32 fpu-hard ppce300c3" >> > TARGET_FPU = "" >> > meta >> > meta-yocto >> > meta-syrcxx = "<unknown>:<unknown>" >> > >> > NOTE: Resolving any missing task queue dependencies >> > NOTE: Preparing runqueue >> > NOTE: Executing SetScene Tasks >> > NOTE: Executing RunQueue Tasks >> > NOTE: Running task 162 of 664 (ID: 6, >> > >> /home/frans/poky-denzil-7.0/**meta/recipes-kernel/linux/linu** >> x-yocto_3.2.bb <http://linux-yocto_3.2.bb> >> <http://linux-yocto_3.2.bb>, >> >> > do_fetch) >> > NOTE: package >> > >> linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a** >> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81: >> > task do_fetch: Started >> > NOTE: package >> > >> linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a** >> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81: >> > task do_fetch: Succeeded >> > NOTE: Running task 644 of 664 (ID: 2, >> > >> /home/frans/poky-denzil-7.0/**meta/recipes-kernel/linux/linu** >> x-yocto_3.2.bb <http://linux-yocto_3.2.bb> >> <http://linux-yocto_3.2.bb>, >> >> > do_unpack) >> > NOTE: package >> > >> linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a** >> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81: >> > task do_unpack: Started >> > NOTE: package >> > >> linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a** >> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81: >> > task do_unpack: Succeeded >> > Nmeta-syrcxx/recipes-kernel/**linux/linux-yocto_3.2.bbappend >> meta-syrcxx/recipes-kernel/**linux/linux-yocto_3.0.**bbappendOTE: >> Running task 645 of 664 (ID: 1, >> > >> /home/frans/poky-denzil-7.0/**meta/recipes-kernel/linux/linu** >> x-yocto_3.2.bb <http://linux-yocto_3.2.bb> >> <http://linux-yocto_3.2.bb>, >> >> > do_kernel_checkout) >> > NOTE: package >> > >> linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a** >> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81: >> > task do_kernel_checkout: Started >> > NOTE: package >> > >> linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a** >> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81: >> > task do_kernel_checkout: Succeeded >> > NOTE: Running task 646 of 664 (ID: 0, >> > >> /home/frans/poky-denzil-7.0/**meta/recipes-kernel/linux/linu** >> x-yocto_3.2.bb <http://linux-yocto_3.2.bb> >> <http://linux-yocto_3.2.bb>, >> >> > do_validate_branches) >> > NOTE: package >> > >> linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a** >> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81: >> > task do_validate_branches: Started >> > NOTE: package >> > >> linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a** >> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81: >> > task do_validate_branches: Succeeded >> > NOTE: Running task 647 of 664 (ID: 3, >> > >> /home/frans/poky-denzil-7.0/**meta/recipes-kernel/linux/linu** >> x-yocto_3.2.bb <http://linux-yocto_3.2.bb> >> <http://linux-yocto_3.2.bb>, >> >> > do_patch) >> > NOTE: package >> > >> linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a** >> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81: >> > task do_patch: Started >> > ERROR: Function failed: do_patch (see >> > >> /home/frans/poky-denzil-7.0-**build/tmp/work/syrcxx-poky-** >> linux-uclibc/linux-yocto-3.2.**11+git1+**b14a08f5c7b469a5077c10942f4e1a** >> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34** >> 93a1a2880a-r1.81/temp/log.do_**patch.27211 >> > for further information) >> > ERROR: Logfile of failure stored in: >> > >> /home/frans/poky-denzil-7.0-**build/tmp/work/syrcxx-poky-** >> linux-uclibc/linux-yocto-3.2.**11+git1+**b14a08f5c7b469a5077c10942f4e1a** >> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34** >> 93a1a2880a-r1.81/temp/log.do_**patch.27211 >> > Log data follows: >> > | Branch meta-temp set up to track remote branch meta from origin. >> > | Deleted branch meta-temp (was 3499d64). >> > | warning: could not find (or was already included): >> > cfg/dmaengine/dmaengine.scc >> > | warning: could not find (or was already included): >> > cfg/usb-mass-storage.scc >> > | warning: could not find (or was already included): cfg/vfat.scc >> > | warning: could not find (or was already included): >> > cfg/dmaengine/dmaengine.scc >> > | warning: could not find (or was already included): >> user-patches.scc >> > | ./2-syrcxx-**215ef69425ed902858630c959dabd5**ce.sco: line 21: >> > dmaengine_**68b329da9893e34099c7d8ad5cb9c9**40: command not found >> > | ./2-syrcxx-**215ef69425ed902858630c959dabd5**ce.sco: line 21: >> > dmaengine_**68b329da9893e34099c7d8ad5cb9c9**40: command not found >> > | [INFO] validating against known patches >> (syrcxx-fsl-mpc8313e-rdb-meta) >> > Branch standard/default/syrcxx set up to track remote branch >> > standard/default/base from origin. >> > [#############################**#####ERROR: Function failed: >> do_patch (see >> > >> /home/frans/poky-denzil-7.0-**build/tmp/work/syrcxx-poky-** >> linux-uclibc/linux-yocto-3.2.**11+git1+**b14a08f5c7b469a5077c10942f4e1a** >> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34** >> 93a1a2880a-r1.81/temp/log.do_**patch.27211 >> > for further information) >> > error: patch failed: drivers/gpio/Makefile:41 ] (-)(76 %) >> > | error: drivers/gpio/Makefile: patch does not apply >> > | To force apply this patch, use 'guilt push -f' >> > | [ERROR] unable to complete push >> > | pending patches are: >> > | Patches directory doesn't exist, try guilt-init >> > | ERROR. could not update git tree >> > | ERROR. Could not modify standard/default/fsl-mpc8313e-** >> rdb/syrcxx >> > NOTE: package >> > >> linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a** >> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81: >> > task do_patch: Failed >> > ERROR: Task 3 >> > >> (/home/frans/poky-denzil-7.0/**meta/recipes-kernel/linux/linu** >> x-yocto_3.2.bb <http://linux-yocto_3.2.bb> >> <http://linux-yocto_3.2.bb>, >> >> > do_patch) failed with exit code '1' >> > NOTE: Tasks Summary: Attempted 647 tasks of which 642 didn't need >> to be >> > rerun and 1 failed. >> > >> > Summary: 1 task failed: >> > >> /home/frans/poky-denzil-7.0/**meta/recipes-kernel/linux/linu** >> x-yocto_3.2.bb <http://linux-yocto_3.2.bb> >> <http://linux-yocto_3.2.bb>, >> >> > do_patch >> > Summary: There was 1 ERROR message shown, returning a non-zero >> exit code. >> > frans@frans-desktop:~/poky-**denzil-7.0-build$ ls -l >> > >> /home/frans/poky-denzil-7.0-**build/tmp/work/syrcxx-poky-** >> linux-uclibc/linux-yocto-3.2.**11+git1+**b14a08f5c7b469a5077c10942f4e1a** >> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81/linux/** >> drivers/gpio/Makefile >> > -rw-r--r-- 1 frans frans 2663 2012-07-30 12:27 >> > >> /home/frans/poky-denzil-7.0-**build/tmp/work/syrcxx-poky-** >> linux-uclibc/linux-yocto-3.2.**11+git1+**b14a08f5c7b469a5077c10942f4e1a** >> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81/linux/** >> drivers/gpio/Makefile >> > frans@frans-desktop:~/poky-**denzil-7.0-build$ bitbake >> virtual/kernel >> > Loading cache: 100% >> > >> |#############################**##############################** >> ##############################**##############################**#| >> > ETA: 00:00:00 >> > Loaded 1106 entries from dependency cache. >> > >> > OE Build Configuration: >> > BB_VERSION = "1.15.1" >> > TARGET_ARCH = "powerpc" >> > TARGET_OS = "linux-uclibc" >> > MACHINE = "syrcxx" >> > DISTRO = "poky" >> > DISTRO_VERSION = "1.2" >> > TUNE_FEATURES = "m32 fpu-hard ppce300c3" >> > TARGET_FPU = "" >> > meta >> > meta-yocto >> > meta-syrcxx = "<unknown>:<unknown>" >> > >> > NOTE: Resolving any missing task queue dependencies >> > NOTE: Preparing runqueue >> > NOTE: Executing SetScene Tasks >> > NOTE: Executing RunQueue Tasks >> > NOTE: Running task 241 of 664 (ID: 3, >> > >> /home/frans/poky-denzil-7.0/**meta/recipes-kernel/linux/linu** >> x-yocto_3.2.bb <http://linux-yocto_3.2.bb> >> <http://linux-yocto_3.2.bb>, >> >> > do_patch) >> > NOTE: package >> > >> linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a** >> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81: >> > task do_patch: Started >> > NOTE: package >> > >> linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a** >> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81: >> > task do_patch: Succeeded >> > NOTE: Running task 648 of 664 (ID: 8, >> > >> /home/frans/poky-denzil-7.0/**meta/recipes-kernel/linux/linu** >> x-yocto_3.2.bb <http://linux-yocto_3.2.bb> >> <http://linux-yocto_3.2.bb>, >> >> > do_kernel_configme) >> > NOTE: Running task 649 of 664 (ID: 20, >> > >> /home/frans/poky-denzil-7.0/**meta/recipes-kernel/linux/linu** >> x-yocto_3.2.bb <http://linux-yocto_3.2.bb> >> <http://linux-yocto_3.2.bb>, >> >> > do_populate_lic) >> > NOTE: package >> > >> linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a** >> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81: >> > task do_populate_lic: Started >> > NOTE: package >> > >> linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a** >> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81: >> > task do_kernel_configme: Started >> > >> > >> > ______________________________**_________________ >> > yocto mailing list >> > yocto@yoctoproject.org <mailto:yocto@yoctoproject.org**> >> >> > >> https://lists.yoctoproject.**org/listinfo/yocto<https://lists.yoctoproject.org/listinfo/yocto> >> > >> >> >> >> -- >> "Thou shalt not follow the NULL pointer, for chaos and madness await >> thee at its end" >> >> >> >> >> ______________________________**_________________ >> yocto mailing list >> yocto@yoctoproject.org >> https://lists.yoctoproject.**org/listinfo/yocto<https://lists.yoctoproject.org/listinfo/yocto> >> > >
_______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto