Hi, On Aug 4, 2012, at 12:59 AM, Elvis Dowson wrote:
> Now to try to debug the init process. I compiled bash statically by making the following changes: diff --git a/meta/recipes-extended/bash/bash.inc b/meta/recipes-extended/bash/bash.inc index 3684191..071d79e 100644 --- a/meta/recipes-extended/bash/bash.inc +++ b/meta/recipes-extended/bash/bash.inc @@ -11,7 +11,7 @@ inherit autotools gettext update-alternatives PARALLEL_MAKE = "" -EXTRA_OECONF = "--enable-job-control" +EXTRA_OECONF = "--enable-job-control --without-gnu-malloc --enable-static-link" export CC_FOR_BUILD = "${BUILD_CC}" ALTERNATIVE_${PN} = "sh" That seems to be working! zImage starting: loaded at 0x00800000 (sp: 0x00d38fb0) Allocating 0x540e0c bytes for kernel ... gunzipping (0x00000000 <- 0x0080f000:0x00a17ddd)...done 0x4235c0 bytes Attached initrd image at 0x00a18000-0x00d3797b initrd head: 0x1f8b0808 Linux/PowerPC load: console=ttyS0,9600n8 ip=off root=/dev/ram rw rootwait init=/bash Finalizing device tree... flat tree at 0xd450e0 PM: Adding info for No Bus:ttyv9 [ 0.473944] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.479429] 83e00000.serial: ttyS0 at MMIO 0x83e01003 (irq = 20) is a 16550 [ 0.674847] console [ttyS0] enabled [ 0.738939] brd: module loaded [ 0.785690] loop: module loaded [ 0.823018] xsysace 83600000.sysace: Xilinx SystemACE revision 1.0.12 [ 0.899716] xsysace 83600000.sysace: No CF in slot [ 0.958789] Xilinx SystemACE device driver, major=254 [ 1.019641] xilinx_emaclite 81000000.ethernet: Device Tree Probing [ 1.093183] xilinx_emaclite 81000000.ethernet: error registering MDIO bus [ 1.174263] xilinx_emaclite 81000000.ethernet: MAC address is now 00:0a:35:b7:78:00 [ 1.267929] xilinx_emaclite 81000000.ethernet: Xilinx EmacLite at 0x81000000 mapped to 0xD10A0000, irq=17 [ 1.382861] xilinx_ps2 81480000.ps2: Device Tree Probing 'ps2' [ 1.452151] xilinx_ps2 81480000.ps2: Xilinx PS2 at 0x81480000 mapped to 0xd1036000, irq=22 [ 1.551544] xilinx_ps2 81481000.ps2: Device Tree Probing 'ps2' [ 1.621222] xilinx_ps2 81481000.ps2: Xilinx PS2 at 0x81481000 mapped to 0xd1038000, irq=23 [ 1.721705] mousedev: PS/2 mouse device common for all mice [ 1.789048] i2c /dev entries driver [ 1.830824] Device Tree Probing 'i2c' [ 1.874996] xilinx-iic #0 at 0x81600000 mapped to 0xD10C0000, irq=18 [ 1.952627] TCP cubic registered [ 1.990531] NET: Registered protocol family 17 [ 2.786413] atkbd serio0: keyboard reset failed on xilinxps2/serio at 81480000 [ 3.270686] RAMDISK: gzip image found at block 0 [ 3.794609] input: AT Raw Set 2 keyboard as /devices/plb.0/xps-ps2.1/81481000.ps2/serio1/input/input0 [ 4.158841] VFS: Mounted root (ext2 filesystem) on device 1:0. [ 4.229004] Freeing unused kernel memory: 152k freed bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell bash-4.2# I get a bash shell prompt with no issues. Not sure at this moment, if it was the updates to gcc-4.7.2 that fixed the problem or if there is still a problem with the init scripts. I'll try to switch back to a non-static bash, and try booting the core-image-minimal filesystem once again. Best regards, Elvis Dowson
_______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto