Hi All, A newbie question:
After creating a new bsp for an Overo using the yocto-bsp script and modifying some kernel config's using menuconfig, I successfully created and loaded the image (core-image-minimal) onto an SD card and booted it. However, I do not see the kernel emitting any boot messages. Am I forgetting to include some recipes? > OMAP36XX/37XX-GP ES2.1, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz > OMAP3 Beagle board + LPDDR/NAND > I2C: ready > DRAM: 512 MiB > NAND: 512 MiB > MMC: OMAP SD/MMC: 0 > *** Warning - bad CRC, using default environment > > In: serial > Out: serial > Err: serial > Beagle Rev Ax/Bx > No EEPROM on expansion board > Die ID #36be00029ff80000016071640201b009 > Hit any key to stop autoboot: 0 > SD/MMC found on device 0 > reading uEnv.txt > > ** Unable to read "uEnv.txt" from mmc 0:1 ** > reading uImage > > 3356520 bytes read > Booting from mmc ... > ## Booting kernel from Legacy Image at 82000000 ... > Image Name: Linux-3.2.18-rt16-yocto-preempt- > Image Type: ARM Linux Kernel Image (uncompressed) > Data Size: 3356456 Bytes = 3.2 MiB > Load Address: 80008000 > Entry Point: 80008000 > Verifying Checksum ... OK > Loading Kernel Image ... OK > OK > > Starting kernel ... > > Uncompressing Linux... done, booting the kernel. > > Yocto (Built by Poky 7.0) 1.2+snapshot-20120828 > ttyO2 > > overo login: root > root@overo:~# uname -a > Linux overo 3.2.18-rt16-yocto-preempt-rt #4 PREEMPT RT Tue Aug 28 22:36:26 > SAST 2012 armv7l GNU/Linux > >
_______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto