I've built an image using meta-cedartrail and copied the .hdd image onto a USB drive.
Booting the 'install' label install as expected to an mSATA SSD as sda on an Intel DN2800MT board and this boots as expected. However, I need to use an eUSB SSD. The installer detects this as 'sdb' and installs ok, but the system fails to boot with a 'kernel panic' reporting that the root FS can't be found. The grub boot specifies: set root=(hd0,1) ... root=/dev/sdb2 Which looks reasonable. The serial console diagnostics "... here are the available partitions:" entry does not list __any__ partitions. Does this mean that the driver required is currently a module and needs to be configured as a built-in? If so, is there an easy way to work out which one? Chris Tapp opensou...@keylevel.com www.keylevel.com _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto