Yeah, sounds like problems with your installation.
remove eclipse and try to set it up again - or try to manually copy
autotools into your plugin folder.
regards,
Björn
2013-01-18 14:10, Flavio Castro Alves Filho skrev:
The problem right now is not regarding compilation issues, but Eclipse
plugin is not launching the compilation correctly.
I tried to install Eclipse Indigo, with the instructions from Yocto dev manual.
I installed Eclipse, its components and when I try to install the
Yocto component, I have the following error:
Cannot complete the install because one or more required items could
not be found.
Software being installed: Yocto Plugin for Eclipse
1.2.0.201210102158 (org.yocto.sdk.feature.group 1.2.0.201210102158)
Missing requirement: Yocto Plugin for Eclipse 1.2.0.201210102158
(org.yocto.sdk.feature.group 1.2.0.201210102158) requires
'org.eclipse.cdt.autotools.core 1.1.0' but it could not be found
I searched for this component in my eclipse/plugins directory and it
is not available.
But ... when I see the installed components in Eclipse (from the UI),
it indicates that autotools for CDT is installed.
2013/1/18 Björn Arnelid <bjorn.arne...@enea.com>:
2013-01-18 13:24, Flavio Castro Alves Filho skrev:
Hello,
I'm facing similar issue (in fact, Raul and I are working together on
this deploy).
I'll describe the steps that we followed. Our system is Ubuntu 12.04
LTS and our Eclipse version is Juno.
1) We build core-image-minimal using poky 1.3 (danny), meta-ti,
meta-openembedded/meta-oe
2) We build toolchain from the build system, using meta-ide-support
3) We downloaded Eclipse classic from Eclipse's website
4) We installed the Eclipse's components, according to Yocto dev
manual instructions
5) We installed Yocto ADT plugin from the repository (version 1.3)
We extracted the generated root filesystem in another directory, in
order to properly configure the Eclipse Yocto plugin.
For now, installation worked fine. The problem occurs when we try to
build the hello world application.
We followed the steps from the Yocto dev manual.
Before starting the build, I lanched the reconfigure option. After,
when started to build, the error message indicates 'no make target'.
Looking at the files, I could see that autogen.sh was executed, but
the configure script don't. I believe that there is some isse where
the IDE is not executing the configure script.
Do you have any clue about how to solve this issue?
Best regards,
Flavio
2013/1/17 Zhang, Jessica <jessica.zh...@intel.com>:
Hi Raul,
Before we can help you debug your issue, can you provide more info
regarding
to:
1. How did you setup your cross toolchain? ADT installer or
toolchain
tarball (your build if so, how did you build it. If not, which one did
you
download?)
2. And also, please provide more info what’s your toolchain setup
in
Eclipse, specifically the Yocto Project ADT preference config under
Window?
Thanks,
Jessica
From: yocto-boun...@yoctoproject.org
[mailto:yocto-boun...@yoctoproject.org]
On Behalf Of Raul Rosetto Munoz
Sent: Thursday, January 17, 2013 4:10 AM
To: yocto@yoctoproject.org
Subject: [yocto] Eclipse Plugin
Hello All,
I followed the ADT manual to create a eclipse environment.
After create a default Hello World Yocto project I get some compile
errors.
At file config.log I saw some errors lines:
configure:2861: checking for arm-poky-linux-gnueabi-gcc
configure:2888: result: arm-poky-linux-gnueabi-gcc -march=armv5te -marm
-mthumb-interwork -mtune=arm926ej-s
--sysroot=/home/prjs/compsis0001/philinux/arm
configure:3157: checking for C compiler version
configure:3166: arm-poky-linux-gnueabi-gcc -march=armv5te -marm
-mthumb-interwork -mtune=arm926ej-s
--sysroot=/home/prjs/compsis0001/philinux/arm --version >&5
arm-poky-linux-gnueabi-gcc (GCC) 4.7.2
Copyright (C) 2012 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is
NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE.
configure:3177: $? = 0
configure:3166: arm-poky-linux-gnueabi-gcc -march=armv5te -marm
-mthumb-interwork -mtune=arm926ej-s
--sysroot=/home/prjs/compsis0001/philinux/arm -v >&5
Using built-in specs.
COLLECT_GCC=arm-poky-linux-gnueabi-gcc
COLLECT_LTO_WRAPPER=/opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/libexec/armv5te-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/4.7.2/lto-wrapper
Target: arm-poky-linux-gnueabi
Configured with:
/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-arm/build/build/tmp/work-shared/gcc-4.7.2-r13/gcc-4.7.2/configure
--build=x86_64-linux --host=i686-pokysdk-linux
--target=arm-poky-linux-gnueabi
--prefix=/opt/poky/1.3/sysroots/i686-pokysdk-linux/usr
--exec_prefix=/opt/poky/1.3/sysroots/i686-pokysdk-linux/usr
--bindir=/opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/bin/armv5te-poky-linux-gnueabi
--sbindir=/opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/bin/armv5te-poky-linux-gnueabi
--libexecdir=/opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/libexec/armv5te-poky-linux-gnueabi
--datadir=/opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/share
--sysconfdir=/opt/poky/1.3/sysroots/i686-pokysdk-linux/etc
--sharedstatedir=/opt/poky/1.3/sysroots/i686-pokysdk-linux/com
--localstatedir=/opt/poky/1.3/sysroots/i686-pokysdk-linux/var
--libdir=/opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/lib/armv5te-poky-linux-gnueabi
--includedir=/opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/include
--oldincludedir=/opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/include
--infodir=/opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/share/info
--mandir=/opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/share/man
--disable-silent-rules --disable-dependency-tracking
--with-libtool-sysroot=/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-arm/build/build/tmp/sysroots/i686-nativesdk-pokysdk-linux
--with-gnu-ld --enable-shared --enable-languages=c,c++
--enable-threads=posix --disable-multilib --enable-c99 --enable-long-long
--enable-symvers=gnu --enable-libstdcxx-pch
--program-prefix=arm-poky-linux-gnueabi- --without-local-prefix
--enable-target-optspace --enable-lto --enable-libssp --disable-bootstrap
--disable-libgomp --disable-libmudflap --with-system-zlib
--with-linker-hash-style=gnu --with-ppl=no --with-cloog=no
--enable-checking=release --enable-cheaders=c_global --with-float=soft
--with-gxx-include-dir=/opt/poky/1.3/sysroots/armv5te-poky-linux-gnueabi/usr/include/c++
--with-build-time-tools=/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-arm/build/build/tmp/sysroots/x86_64-linux/usr/arm-poky-linux-gnueabi/bin
--with-sysroot=/opt/poky/1.3/sysroots/armv5te-poky-linux-gnueabi
--with-build-sysroot=/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-arm/build/build/tmp/sysroots/qemuarm
--disable-libunwind-exceptions --disable-libssp --disable-libgomp
--disable-libmudflap
--with-mpfr=/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-arm/build/build/tmp/sysroots/i686-nativesdk-pokysdk-linux
--with-mpc=/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-arm/build/build/tmp/sysroots/i686-nativesdk-pokysdk-linux
--enable-nls
Thread model: posix
gcc version 4.7.2 (GCC)
configure:3177: $? = 0
configure:3166: arm-poky-linux-gnueabi-gcc -march=armv5te -marm
-mthumb-interwork -mtune=arm926ej-s
--sysroot=/home/prjs/compsis0001/philinux/arm -V >&5
arm-poky-linux-gnueabi-gcc: error: unrecognized command line option '-V'
arm-poky-linux-gnueabi-gcc: fatal error: no input files
compilation terminated.
configure:3177: $? = 1
configure:3166: arm-poky-linux-gnueabi-gcc -march=armv5te -marm
-mthumb-interwork -mtune=arm926ej-s
--sysroot=/home/prjs/compsis0001/philinux/arm -qversion >&5
arm-poky-linux-gnueabi-gcc: error: unrecognized command line option
'-qversion'
arm-poky-linux-gnueabi-gcc: fatal error: no input files
compilation terminated.
configure:3177: $? = 1
configure:3197: checking whether the C compiler works
configure:3219: arm-poky-linux-gnueabi-gcc -march=armv5te -marm
-mthumb-interwork -mtune=arm926ej-s
--sysroot=/home/prjs/compsis0001/philinux/arm -g -O0
--sysroot=/opt/poky/1.3 --sysroot=/opt/poky/1.3 --sysroot=/opt/poky/1.3
conftest.c >&5
/opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/libexec/armv5te-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/4.7.2/ld:
cannot find crt1.o: No such file or directory
/opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/libexec/armv5te-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/4.7.2/ld:
cannot find crti.o: No such file or directory
/opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/libexec/armv5te-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/4.7.2/ld:
cannot find crtbegin.o: No such file or directory
/opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/libexec/armv5te-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/4.7.2/ld:
cannot find -lgcc
/opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/libexec/armv5te-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/4.7.2/ld:
cannot find -lgcc_s
/opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/libexec/armv5te-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/4.7.2/ld:
cannot find -lc
/opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/libexec/armv5te-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/4.7.2/ld:
cannot find -lgcc
/opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/libexec/armv5te-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/4.7.2/ld:
cannot find -lgcc_s
/opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/libexec/armv5te-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/4.7.2/ld:
cannot find crtend.o: No such file or directory
/opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/libexec/armv5te-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/4.7.2/ld:
cannot find crtn.o: No such file or directory
collect2: error: ld returned 1 exit status
configure:3223: $? = 1
configure:3261: result: no
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "teste"
| #define PACKAGE_TARNAME "teste"
| #define PACKAGE_VERSION "0.1.0"
| #define PACKAGE_STRING "teste 0.1.0"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define PACKAGE "teste"
| #define VERSION "0.1.0"
| /* end confdefs.h. */
|
| int
| main ()
| {
|
| ;
| return 0;
| }
configure:3266: error: in `/home/prjs/compsis0001/workspace/teste':
configure:3268: error: C compiler cannot create executables
See `config.log' for more details
## ---------------- ##
## Cache variables. ##
## ---------------- ##
...
...
...
## ----------------- ##
## Output variables. ##
## ----------------- ##
...
...
...
/* confdefs.h */
#define PACKAGE_NAME "teste"
#define PACKAGE_TARNAME "teste"
#define PACKAGE_VERSION "0.1.0"
#define PACKAGE_STRING "teste 0.1.0"
#define PACKAGE_BUGREPORT ""
#define PACKAGE_URL ""
#define PACKAGE "teste"
#define VERSION "0.1.0"
configure: exit 77
Some One can Help me?
Thanks
--
Raul Rosetto Muñoz
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
Don't you need to develop against a -sdk image?
Try building a debug image, extract the file-system and point to that when
developing.
regards,
Björn
--
Björn Arnelid | Software Engineer
M: +46-70-971 4459 | björn.arne...@xdin.com
XDIN AB | Knarrarnäsgatan 7 | SE-164 40 Kista | xdin.com
Xdin develop and deliver expertise through committed engineering and IT
consultants.
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
--
Björn Arnelid | Software Engineer
M: +46-70-971 4459 | björn.arne...@xdin.com
XDIN AB | Knarrarnäsgatan 7 | SE-164 40 Kista | xdin.com
Xdin develop and deliver expertise through committed engineering and IT
consultants.
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
