On Sat, 2013-06-15 at 16:40 +0000, Thanassis Silis wrote: > Hello everyone, > I created a "hello world" ADT C application (basically following the > PDM > http://www.yoctoproject.org/docs/latest/dev-manual/dev-manual.html#application-development-workflow > ) > > > The guide gives directions to run the built application in a qemu > instance. However, this fails. The reason seems to be related to the > imx6 uImage. > https://lists.yoctoproject.org/pipermail/meta-freescale/2012-December/000360.html > so I didn't try to much to play around with qemu and switched to try > and do debugging directly on the board (the real target). > > > I presume paragraph 4.2.2.6. is the same for both cases (qemu vs real > target) - only in step 10, i provided the real targets ip address (I > can ssh to this address without any problem and indeed connect to my > target board - a freescale imx6q sabrelite board). > > > When I press debug however, this msg pops up: > > > "Launching > <projectname>_gdb_armv7a-vfp-neon-poky-linux-gnueabi" has > encountered an error. > > > and the details are: > > > Error during file upload. > Connection refused > Connection refused > Connection refused > > > any idea about what could cause this error? > > > Thank you for your help > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto
Hi, Can you browse the target from Eclipse? Try opening the TCF connection in the RSE perpective and see if you can access the files. Youy might have to provide some login details (user+pass). br, --Adrian _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
