On 2013-07-18 07:50, Rich Bayliss wrote:
On 18 July 2013 12:28, Rich Bayliss <richbayl...@gmail.com> wrote:
On 18 July 2013 12:07, Paul Barker <p...@paulbarker.me.uk> wrote:
On 18 July 2013 11:55, Rich Bayliss <richbayl...@gmail.com> wrote:
Is this a known issue? Does anyone have any ideas?
Could you try running 'ip addr' and 'ip link' instead of 'ifconfig'?
Just wondering whether they query information differently and might
show something else. The other place to look is in the output of
'dmesg'.
Does un-plugging and re-plugging the network cable (without running
'ifup' or 'ifdown') make any difference?
--
Paul Barker
Email: p...@paulbarker.me.uk
http://www.paulbarker.me.uk
I have tried unplugging/replugging and it stays down.
I have run the commands and there is a difference, however I also ran
"lsmod" and there is a big difference.
Working:
root@raspberrypi:~# lsmod
Not tainted
ipv6 281069 12 - Live 0xbf02c000
spidev 5343 0 - Live 0xbf022000
joydev 9477 0 - Live 0xbf01c000
evdev 9486 0 - Live 0xbf015000
leds_gpio 2194 0 - Live 0xbf011000
led_class 3581 1 leds_gpio, Live 0xbf00d000
spi_bcm2708 4631 0 - Live 0xbf004000
i2c_bcm2708 3879 0 - Live 0xbf000000
Not working:
root@raspberrypi:~# lsmod
Not tainted
ipv6 281069 12 - Live 0xbf00d000
joydev 9477 0 - Live 0xbf007000
evdev 9486 0 - Live 0xbf000000
At this point, if I then do the "ifdown"/"ifup" dance, my connection
works, but not more modules are loaded - does this help you guys?
--
Rich Bayliss
I have connected a serial terminal now, and I can provide boot logs.
It looks like maybe UDEV is causing/part of the issue. When it boots
successfully, then I dont get a "udevadm settle" message:
Starting udev
[ 3.085091] smsc95xx v1.0.4
[ 3.157196] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at
usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:e1:f6:e2
[ 3.487588] udevd[74]: starting version 182
Starting Bootlog daemon: bootlogd.
[ 6.162643] EXT4-fs (mmcblk0p2): re-mounted. Opts:
errors=remount-ro,data=ordered
Configuring network interfaces... udhcpc (v1.21.1) started
Sending discover...
[ 9.138863] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps,
full-duplex, lpa 0xC1E1
Sending discover...
Sending select for 192.168.1.110...
Lease of 192.168.1.110 obtained, lease time 268435455
/etc/udhcpc.d/50default: Adding DNS 192.168.1.254
done.
However when the network is broken I see the following:
Starting udev
[ 5.342406] udevd[74]: starting version 182
Starting Bootlog daemon: bootlogd.
[ 7.938281] EXT4-fs (mmcblk0p2): re-mounted. Opts:
errors=remount-ro,data=ordered
udevadm settle - timeout of 3 seconds reached, the event queue contains:
/sys/devices/platform/bcm2708_usb/usb1/1-1/1-1.1/1-1.1:1.0/net/eth0 (980)
/sys/devices/platform/mmc_host/mmc0/mmc0:8fe4/block/mmcblk0/mmcblk0p1 (985)
/sys/devices/platform/mmc_host/mmc0/mmc0:8fe4/block/mmcblk0/mmcblk0p2 (986)
Configuring network interfaces... ifup: interface lo already configured
ifup: interface eth0 already configured
done.
This looks more like there is some state information left around
that is keeping the network from coming up - it thinks that it
already is up.
In your original post, you mentioned 'I pull the power/reboot'. Is that
how you are rebooting the board, by just yanking the power? If so, that
could definitely explain such a case where state information says one
thing and real life doesn't match.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
