On 02/08/13 08:35, Chris Tapp wrote: >> Depends on the bios, if your machine's bios supports PXE, then you >> do not need ipxe, just a tftp server set up on the LAN that serves >> PXELinux. > > My case is a bit more complicated as I also can't have non-secure > (t)ftp! Are you saying that PXE can work without DHCP/BOOTP?
It probably depends on the BIOS, iirc, standard PXE does not support anything other than tfpt, but you can probably configure the IP settings manually, and I think the bios on the machine I was working with supported https (but I am not 100% sure, and can't check at the moment). iPXE supports https, of course, so we definitely want iPXE recipe and documentation. > It would benefit from some scripting support in the image to > personalise it as it boots (e.g. setting IP configuration, hostname, > etc.) - I'm currently looking to do this by passing parameters back > from the server through the kernel command line. Yeah, but keep in mind that the stuff only happens 'in the image' when you have already booted, so you can only script stuff to do with the rootfs in the image; the kernel and initrd is loaded by the PXE bootloader so the control here is whatever the PXE bootloader gives you. Tomas -- http://sleepfive.com _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto