Hello, I got the following error. DEBUG: Executing shell function do_compile NOTE: make -C /home/vidal/POKY/build101613_zedboard/poky/build/tmp/sysroots/zedboard-zynq7/usr/src/kernel/tools/perf O=/home/vidal/POKY/build101613_zedboard/poky/build/tmp/work/zedboard_zynq7-poky-linux-gnueabi/perf/1.0-r8/perf-1.0 CROSS_COMPILE=arm-poky-linux-gnueabi- ARCH=arm CC=arm-poky-linux-gnueabi-gcc -march=armv7-a -mthumb-interwork -mfloat-abi=softfp -mfpu=neon --sysroot=/home/vidal/POKY/build101613_zedboard/poky/build/tmp/sysroots/zedboard-zynq7 AR=arm-poky-linux-gnueabi-ar perfexecdir=/usr/lib/perf NO_GTK2=1 NO_DWARF=1 prefix=/usr bindir=/usr/bin sharedir=/usr/share sysconfdir=/etc perfexecdir=/usr/lib/perf/perf-core ETC_PERFCONFIG=../etc sharedir=share mandir=share/man infodir=share/info all CHK -fstack-protector-all CHK -Wstack-protector CHK -Wvolatile-register-var CHK bionic CHK libelf CHK libdw make: Entering directory `/home/vidal/POKY/build101613_zedboard/poky/build/tmp/sysroots/zedboard-zynq7/usr/src/kernel/tools/perf' Makefile:554: No libdw.h found or old libdw.h found or elfutils is older than 0.138, disables dwarf support. Please install new elfutils-devel/libdw-dev CHK libunwind Makefile:570: No libunwind found, disabling post unwind support. Please install libunwind-dev[el] >= 0.99 I installed libunwind-devel-1.0.1-5.fc18.x86_64 Is this a zedboard-zynq specific error? Is this an error in building the kernel? I did not see this when building for the beagleboard. I installed libunwind-devel-1.0.1-5.fc18.x86_64 I removed the package libunwind-devel-1.0.1-5.fc18.x86_64 since nothing improved with the package installed. I am in the process of running a clean build after all repository were loaded in clean folder. I appreciate any and all help. Regards
On Wed, Oct 16, 2013 at 5:06 PM, Edward Vidal <vidal.devel...@gmail.com>wrote: > Hello Khem, > Thanks for the help after modifying my local.conf > MACHINE ?= "zedboard-zynq7" > My build "MACHINE=zedboard-zynq7 bitbake core-image-sato" is in the > process now 295 of 5076 tasks > should take a short time to complete. > regards > > > > On Wed, Oct 16, 2013 at 4:45 PM, Khem Raj <raj.k...@gmail.com> wrote: > >> >> On Oct 16, 2013, at 2:57 PM, Edward Vidal <vidal.devel...@gmail.com> >> wrote: >> >> > Hello, >> > I built a zedboard core-image-sato on 09/21/13 with meta-xilinx at that >> time I had the following folders. >> > >> > meta-kc705 >> > meta-zc702 >> > meta-zedboard >> > >> > Build Configuration: >> > BB_VERSION = "1.19.1" >> > BUILD_SYS = "x86_64-linux" >> > NATIVELSBSTRING = "Fedora-18" >> > TARGET_SYS = "arm-poky-linux-gnueabi" >> > MACHINE = "zedboard" >> > DISTRO = "poky" >> > DISTRO_VERSION = "1.4+snapshot-20130921" >> > TUNE_FEATURES = " armv7a vfp neon zynq" >> > TARGET_FPU = "vfp-neon" >> > meta >> > meta-yocto = >> "(nobranch):3dee534f1e25109e0bdb681de0746c336f4b8840" >> > meta-xilinx >> > meta-kc705 >> > meta-zc702 >> > meta-zedboard = "master:46f4c79d6d55b556a90bb0fd89c2c09acf2aebff" >> > meta-yocto-bsp = >> "(nobranch):3dee534f1e25109e0bdb681de0746c336f4b8840" >> > >> > With the dora release I did a new clone of git:// >> git.yoctoproject.org/meta-xilinx >> > now I do not see >> > meta-kc705 >> > meta-zc702 >> > meta-zedboard >> > >> > When I execute MACHINE=zedboard bitbake core-image-sato >> > ERROR: OE-core's config sanity checker detected a potential >> misconfiguration. >> > Either fix the cause of this error or at your own risk disable the >> checker (see sanity.conf). >> > Following is the list of potential problems / advisories: >> > >> > Please set a valid MACHINE in your local.conf or environment >> > >> > ERROR: Execution of event handler 'check_sanity_eventhandler' failed >> > In my local.conf I have the following. >> > >> > MACHINE ?= "zedboard" >> > >> > bblayers.conf >> > # LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf >> > # changes incompatibly >> > LCONF_VERSION = "6" >> > >> > BBPATH = "${TOPDIR}" >> > BBFILES ?= "" >> > >> > BBLAYERS ?= " \ >> > /home/vidal/POKY/build101613_zedboard/poky/meta \ >> > /home/vidal/POKY/build101613_zedboard/poky/meta-yocto \ >> > /home/vidal/POKY/build101613_zedboard/poky/meta-xilinx \ >> > /home/vidal/POKY/build101613_zedboard/poky/meta-yocto-bsp \ >> > " >> > BBLAYERS_NON_REMOVABLE ?= " \ >> > /home/vidal/POKY/build101613_zedboard/poky/meta \ >> > /home/vidal/POKY/build101613_zedboard/poky/meta-yocto \ >> > " >> > Any help will be appreciated. >> > Regards >> >> it seems like layer went thru some restructuring e.g. see >> commit d9617006376d73e37f1db17857ee06c24e6b7c03 >> Author: Nathan Rossi <nathan.ro...@xilinx.com> >> Date: Fri Aug 2 12:41:14 2013 +1000 >> >> meta-*: Remove deprecated sublayers >> >> * The machines supported in the sublayer BSPs are now supported in >> the base >> meta-xilinx layer, these sublayers are no longer required. >> * Relevant documentation has also been relocated into >> meta-xilinx/docs/*. >> >> >> >> So may be zedboard -> zedboard-zynq7 >> >> >> > >> > _______________________________________________ >> > yocto mailing list >> > yocto@yoctoproject.org >> > https://lists.yoctoproject.org/listinfo/yocto >> >> >
_______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto