On 2013-10-31 09:45, Edward Vidal wrote:
Hello all, less /etc/udev/rules.d/10-c920.rules WARNING: terminal is not fully functional SUBSYSTEM=="video4linux", BUS=="usb", ATTRS{idvendor}=="0x046d", ATTRS{idProduct }=="0x082d", NAME="video0", MODE:="0660" It appears the key BUS is not correct based on the tests below. My mknod is /bin/mknod. find / -name sysfs /usr/include/sysfs /usr/src/kernel/fs/sysfs
Note: chasing this udev behaviour is a waste of time if the kernel doesn't recognize and support your device. Have you even looked to see if this camera is supported in your kernel? I could not find a driver for it when I looked, even in the latest mainline kernel. What kernel are you trying to use?
udevadm test --action=add /usr/include/sysfs or udevadm test --action=add /usr/src/kernel/fs/sysfs unable to open device '/sys/usr/src/kernel/fs/sysfs' run_command: calling: test adm_test: version 182 This program is for debugging only, it does not run any program, specified by a RUN key. It may show incorrect results, because some values may be different, or not available at a simulation run. builtin_kmod_init: load module index add_matching_files: unable to open '/var/run/udev/rules.d': No such file or directory parse_file: reading '/etc/udev/rules.d/10-c920.rules' as rules file add_rule: unknown key 'BUS' in /etc/udev/rules.d/10-c920.rules:1 add_rule: invalid rule '/etc/udev/rules.d/10-c920.rules:1' lots of output udev_rules_new: rules use 18408 bytes tokens (1534 * 12 bytes), 12756 bytes buffer udev_rules_new: temporary index used 12800 bytes (640 * 20 bytes) unable to open device '/sys/usr/include/sysfs' builtin_kmod_exit: unload module index Do I add RUN+="/bin/mknod /dev/video0 c 81 0" see below new version of 1--c920.rules cat 10-c920.rules SUBSYSTEM=="video4linux", BUS=="usb", ATTRS{idvendor}=="0x046d", ATTRS{idProduct}=="0x082d", NAME="video0", MODE:="0660", RUN+="/bin/mknod /dev/video0 c 81 0" udevadm test --action=add /usr/src/kernel/fs/sysfs run_command: calling: test adm_test: version 182 This program is for debugging only, it does not run any program, specified by a RUN key. It may show incorrect results, because some values may be different, or not available at a simulation run. builtin_kmod_init: load module index add_matching_files: unable to open '/var/run/udev/rules.d': No such file or directory parse_file: reading '/etc/udev/rules.d/10-c920.rules' as rules file add_rule: unknown key 'BUS' in /etc/udev/rules.d/10-c920.rules:1 add_rule: invalid rule '/etc/udev/rules.d/10-c920.rules:1' Where do you find information for working with rules other than just some examples? Thanks On Thu, Oct 31, 2013 at 8:41 AM, Khem Raj <raj.k...@gmail.com <mailto:raj.k...@gmail.com>> wrote: On Wed, Oct 30, 2013 at 6:12 PM, Edward Vidal <vidal.devel...@gmail.com <mailto:vidal.devel...@gmail.com>> wrote: > Hello, > This is when I connect the camera > udevadm monitor test > monitor will print the received events for: > UDEV - the event which udev sends out after rule processing > KERNEL - the kernel uevent > > KERNEL[803.263336] add > /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.3/1-2.3.4 (usb) > KERNEL[803.267456] add > /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.3/1-2.3.4/1-2.3.4:1.0 > (usb) > KERNEL[803.269287] add > /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.3/1-2.3.4/1-2.3.4:1.1 > (usb) > KERNEL[803.269958] add > /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.3/1-2.3.4/1-2.3.4:1.2 > (usb) > KERNEL[803.270721] add > /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.3/1-2.3.4/1-2.3.4:1.3 > (usb) > KERNEL[803.276214] add > /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.3/1-2.3.4/usb_device/usbdev1.15 > (usb_device)********** > UDEV [803.277191] add > /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.3/1-2.3.4 (usb) > UDEV [803.306091] add > /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.3/1-2.3.4/usb_device/usbdev1.15 > (usb_device) > UDEV [803.318603] add > /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.3/1-2.3.4/1-2.3.4:1.2 > (usb) > UDEV [803.324249] add > /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.3/1-2.3.4/1-2.3.4:1.1 > (usb) > UDEV [803.329712] add > /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.3/1-2.3.4/1-2.3.4:1.0 > (usb) > UDEV [803.333160] add > /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.3/1-2.3.4/1-2.3.4:1.3 > (usb) > > still no /dev/video0 > ls -la /dev/v* > crw-rw---- 1 root tty 7, 0 Jan 1 2000 /dev/vcs > crw-rw---- 1 root tty 7, 1 Jan 1 2000 /dev/vcs1 > crw-rw---- 1 root tty 7, 2 Jan 1 2000 /dev/vcs2 > crw-rw---- 1 root tty 7, 3 Oct 29 13:51 /dev/vcs3 > crw-rw---- 1 root tty 7, 128 Jan 1 2000 /dev/vcsa > crw-rw---- 1 root tty 7, 129 Jan 1 2000 /dev/vcsa1 > crw-rw---- 1 root tty 7, 130 Jan 1 2000 /dev/vcsa2 > crw-rw---- 1 root tty 7, 131 Oct 29 13:51 /dev/vcsa3 > root@beagleboard:~# lsusb > Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. > Bus 001 Device 004: ID 0409:0059 NEC Corp. HighSpeed Hub > Bus 001 Device 005: ID 413c:2005 Dell Computer Corp. RT7D50 Keyboard > Bus 001 Device 006: ID 046d:c001 Logitech, Inc. N48/M-BB48 [FirstMouse Plus] > Bus 001 Device 015: ID 046d:082d Logitech, Inc. > *********************************************************************************** > > > udevadm monitor --udev > monitor will print the received events for: > UDEV - the event which udev sends out after rule processing > camera removed***************************************************** > UDEV [1325.916811] remove > /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.3/1-2.3.4/1-2.3.4:1.1 > (usb) > UDEV [1325.918489] remove > /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.3/1-2.3.4/1-2.3.4:1.0 > (usb) > UDEV [1325.919282] remove > /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.3/1-2.3.4/1-2.3.4:1.2 > (usb) > UDEV [1325.923005] remove > /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.3/1-2.3.4/1-2.3.4:1.3 > (usb) > UDEV [1325.928437] remove > /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.3/1-2.3.4/usb_device/usbdev1.15 > (usb_device) > UDEV [1325.932709] remove > /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.3/1-2.3.4 (usb) > camera added > *************************************************************************** > UDEV [1329.344727] add > /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.3/1-2.3.4 (usb) > UDEV [1329.376313] add > /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.3/1-2.3.4/usb_device/usbdev1.16 > (usb_device) > UDEV [1329.389008] add > /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.3/1-2.3.4/1-2.3.4:1.2 > (usb) > UDEV [1329.396241] add > /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.3/1-2.3.4/1-2.3.4:1.1 > (usb) > UDEV [1329.401795] add > /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.3/1-2.3.4/1-2.3.4:1.0 > (usb) > UDEV [1329.406739] add > /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.3/1-2.3.4/1-2.3.4:1.3 > (usb) > > This is what I get in /var/log/messages > Oct 29 14:17:28 beagleboarduser.info <http://user.info> kernel: usb 1-2.3.4: USB disconnect, > device number 16 > Oct 29 14:17:31 beagleboarduser.info <http://user.info> kernel: usb 1-2.3.4: new high-speed > USB device number 17 using ehci-omap > Is there anything else that I can test / provide OK another thing to try is udevadm test --action=add /sys/.... where /sys/... is path to your device in sysfs this should give enough reason to what udev is doing when its getting an add event for this device. Secondly in your udev rule refer mknod with absolute path like /sbin/mknod or /bin/mknod where ever it is _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
-- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto