Hi Max, On Thu, Nov 07, 2013 at 09:20:04PM -0500, Maxwell Bottiger wrote: > I have a UBI JFFS file system I just built and flashed onto my at91sam9x5ek > board. I think everything built correctly, but I get the following error when > booting the device: <snip> > > U-Boot> printenv > bootargs=mem=128M console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/ > kernel)ro,-(rootfs) root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root= > ubi0:rootfs > bootcmd=nand read.jffs2 0x22000000 0x200000 0x250000; bootm 0x22000000 > bootdelay=1 > baudrate=115200 > ethact=macb0 > > Can anyone point me to where the UBI parameters are decided, or let me know if > I'm totally on the wrong track? As always, I appreciate the help.
UBI Parameters will generally be present in the machine conf file. In this case: "meta-atmel/conf/machine/at91sam9x5ek.conf" In the build directory, you can find "ubinize.cfg". You can see the various parameters related to ubifs build in that file also. > -Max Best Regards, Maxin _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto