David, Thanks for that pointer. I updated my u-boot ini file to pass the console=tty2 to the kernel command line and it took care of the problem.
-Kevin ________________________________ From: David Welch [djwelch...@gmail.com] Sent: Wednesday, March 12, 2014 4:39 AM To: Kevin Evans Cc: yocto@yoctoproject.org Subject: Re: [yocto] SysVinit and psplash I too found this to be a problem. Setting console=tty2 made the messages come out on another console and not visible on the screen. On Mon, Mar 10, 2014 at 4:19 PM, Kevin Evans <kevin.ev...@rigaku.com<mailto:kevin.ev...@rigaku.com>> wrote: Hello all: I am using yocto denzil release with an IGEPv2 (beagle board clone). It appears the init is ignoring my log level being set to quite and prints the run level 5 messages and they appear between the splash screen and xorg starting. I am not sure of the best way to suppress the text being displayed here. So far I have used: 1. Set loglevel=quiet in kernel commnand line (this silences the logging before pslash but not after. 2. Set the USE_VT build variable to "0". this only disabled logins through the VT. Not sure what to try now. Any help would be appreciated. -- _______________________________________________ yocto mailing list yocto@yoctoproject.org<mailto:yocto@yoctoproject.org> https://lists.yoctoproject.org/listinfo/yocto
-- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
