Hi, This is Rohit, I am trying to get yocto wokring on a ARM Board (EMB-3500 iMX6).
The board doesn't support booting from Memory card. So we use the mfgtools to flash the image to on board Nand. We have Ubuntu Image which works with no issue. The Ubuntu Image has 3 files, 1. rootfs.tar.bz2 2. u-boot.bin 3. uImage I have build a Yocto iMX6qSabreauto core-image-full-cmdline image, copied the "core-image-full-cmdline-imx6qsabreauto.tar.bz2" and "uImage-imx6qsabreauto.bin" in place of "rootfs.tar.bz2" and "uImage" Tried to flash the image to Nand, it fails to boot. I get following error, MMC read: dev # 3, block # 2048, count 8192 ... 8192 blocks read: OK ## Booting kernel from Legacy Image at 10800000 ... Image Name: Linux-3.10.17-1.0.0_ga+g232293e Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 5264120 Bytes = 5 MB Load Address: 10008000 Entry Point: 10008000 Verifying Checksum ... Bad Data CRC ERROR: can't get kernel image! I have tried to use the working kernel (Ubuntu - uImage). The kernel loads, but the board turns off automatically. I get following message before it turn off, EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (mmcblk0p1): using internal journal EXT3-fs (mmcblk0p1): recovery complete EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode VFS: Mounted root (ext3 filesystem) on device 179:1. Freeing init memory: 212K Any help in fixing this issue is really appreciated. Thanks, Rohit
-- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto