L.S.,
I followed the directions on http://www.codeproject.com/Articles/774826/Adding-rd-party-components-to -Yocto-OpenEmbedded-L to add an example project to my yocto-poky build tree. a strange thing happens: when using bitbake bbexample-lt for "qemuarm" or "edgerouter", it builds ok. however,if I select "beaglebone" for "MACHINE", I get a configure error in my log file: "configure:3024: checking for C compiler version configure:3033: arm-poky-linux-gnueabi-gcc -march=armv7-a -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/ruud/poky-daisy-11.0.0/build/tmp/sysroots/beaglebone --version >&5 /home/ruud/poky-daisy-11.0.0/build/tmp/work/cortexa8hf-vfp-neon-poky-lin ux-gnueabi/bbexample-lt/1.0-r0/bbexample-1.0/configure: line 3035: arm-poky-linux-gnueabi-gcc: command not found" However, the building e.g. a "core-image-minimal" or my added "core-image-mono" for a "beaglebone" builds fine and I can use the RFS on a "real" hardware board. What can be the cause of this? Best regards, Ruud Ruud den Bekker Cordis Automation B.V. High Tech Campus 9 5656 AE Eindhoven
-- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto