Hi Robert, On Wednesday 09 July 2014 12:33:15 Robert Berger wrote: > I just noticed this [1] and there are rumors that in the next release > hardware testing will also work with yocto-autobuilder. > > I do have a couple of boards deployer in my lab and build with > autobuilder images for them. > > The consoles of my boards are connected via conservers to ethernet and I > can also remotely switch on/off power. > > For the beagle bone white the setup is more complex in order to press > the reset button remotely and turn on/off the power over the USB cable > remotely. > > My goal would be to build something with autobuilder, deploy to a board > and run some tests. > > Is this feasible with my current infrastructure? > Can someone please guide me in the right directions.
Absolutely. As a starting point I'd recommend the following section of the manual: http://www.yoctoproject.org/docs/current/dev-manual/dev-manual.html#performing-automated-runtime-testing Some of the capabilities in this area were added after 1.6, i.e. they are only in master. Cheers, Paul -- Paul Eggleton Intel Open Source Technology Centre -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto