Hi there, On Tuesday 25 November 2014 19:27:13 peterengcomau...@adam.com.au wrote: > thank you. i have fixed the curl problem but a new problem has occured > with the build. This problem did not appear in v1.6.1. The problem is: > > lachlan@lachlan-SVP13215PXB:~/poky/build-atmel$ bitbake > atmel-qt5-demo-image -c populate_sdk > > Loading cache: 100% > > |########################################################################### > |########################################################################### > |#####| > ETA: 00:00:00 > > Loaded 2108 entries from dependency cache. > > NOTE: Resolving any missing task queue dependencies > > Build Configuration: > > BB_VERSION = "1.24.0" > > BUILD_SYS = "x86_64-linux" > > NATIVELSBSTRING = "Ubuntu-14.04" > > TARGET_SYS = "arm-poky-linux-gnueabi" > > MACHINE = "sama5d3xek" > > DISTRO = "poky" > > DISTRO_VERSION = "1.7" > > TUNE_FEATURES = "arm armv7a vfp thumb callconvention-hard cortexa5" > > > TARGET_FPU = "vfp" > > meta-atmel = "my_branch:711809b0d91f816b10e70508986b3f43098000ba" > > meta-qt5 = "my_branch:0732e184acef5e0200f46d7f95702774e5de1904" > > meta > > meta-yocto > > meta-yocto-bsp = "dizzy:db7f4f31c915a59c502cac4be905d23df5246b3d" > > meta-oe > > meta-python > > meta-networking > > meta-ruby = "my_branch:9efaed99125b1c4324663d9a1b2d3319c74e7278" > > NOTE: Preparing runqueue > > NOTE: Executing SetScene Tasks > > NOTE: Executing RunQueue Tasks > > ERROR: Function failed: do_configure (log file is located at > /home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/ > gstreamer1.0-plugins-hantro/1.0-r1/temp/log.do_configure.5736) > > > ERROR: Logfile of failure stored in: > /home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/ > gstreamer1.0-plugins-hantro/1.0-r1/temp/log.do_configure.5736 > Log data follows: > | DEBUG: Executing python function sysroot_cleansstate > | > | DEBUG: Python function sysroot_cleansstate finished > | > | DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common', > > 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi', > 'common'] > > | DEBUG: Executing shell function autotools_preconfigure > | > | DEBUG: Shell function autotools_preconfigure finished > | > | DEBUG: Executing python function autotools_copy_aclocals > | > | DEBUG: Python function autotools_copy_aclocals finished > | > | DEBUG: Executing shell function do_configure > | > | automake (GNU automake) 1.14.1 > | > | Copyright (C) 2013 Free Software Foundation, Inc. > | > | License GPLv2+: GNU GPL version 2 or later > | > | This is free software: you are free to change and redistribute it. > | > | > | There is NO WARRANTY, to the extent permitted by law. > | > | > | > | Written by Tom Tromey > | > | and Alexandre Duret-Lutz . > | > | AUTOV is 1.14 > | > | NOTE: Executing ACLOCAL="aclocal > > --system-acdir=/home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky > -linux-gnueabi/gstreamer1.0-plugins-hantro/1.0-r1/build/aclocal-copy/ > --automake-acdir=/home/lachlan/poky/build-atmel/tmp/sysroots/x86_64-linux/u > sr/share/aclocal-1.14" autoreconf --verbose --install --force > --exclude=autopoint -I > /home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/ > gstreamer1.0-plugins-hantro/1.0-r1/gst-hantro-g1-1.0/m4/ > | autoreconf: Entering directory `' > | > | autoreconf: configure.ac: not using Gettext > | > | autoreconf: running: aclocal > > --system-acdir=/home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky > -linux-gnueabi/gstreamer1.0-plugins-hantro/1.0-r1/build/aclocal-copy/ > --automake-acdir=/home/lachlan/poky/build-atmel/tmp/sysroots/x86_64-linux/u > sr/share/aclocal-1.14 -I > /home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/ > gstreamer1.0-plugins-hantro/1.0-r1/gst-hantro-g1-1.0/m4/ -I > /home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/ > gstreamer1.0-plugins-hantro/1.0-r1/gst-hantro-g1-1.0/m4/ --force -I m4 -I > common/m4 > > | autoreconf: configure.ac: tracing > | > | autoreconf: running: libtoolize --copy --force > | > | libtoolize: putting auxiliary files in `.'. > | > | libtoolize: copying file `./ltmain.sh' > | > | libtoolize: putting macros in `m4'. > | > | libtoolize: copying file `m4/libtool.m4' > | > | libtoolize: copying file `m4/ltoptions.m4' > | > | libtoolize: copying file `m4/ltsugar.m4' > | > | libtoolize: copying file `m4/ltversion.m4' > | > | libtoolize: copying file `m4/lt~obsolete.m4' > | > | libtoolize: Remember to add `LT_INIT' to configure.ac. > | > | libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to > > configure.ac and > > | libtoolize: rerunning libtoolize, to keep the correct libtool > > macros in-tree > > | autoreconf: running: > /home/lachlan/poky/build-atmel/tmp/sysroots/x86_64-linux/usr/bin/autoconf > --include=/home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linu > x-gnueabi/gstreamer1.0-plugins-hantro/1.0-r1/gst-hantro-g1-1.0/m4/ --force > > | autoreconf: running: > /home/lachlan/poky/build-atmel/tmp/sysroots/x86_64-linux/usr/bin/autoheader > --include=/home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linu > x-gnueabi/gstreamer1.0-plugins-hantro/1.0-r1/gst-hantro-g1-1.0/m4/ --force > > | autoreconf: running: automake --add-missing --copy --force-missing > | > | > | Makefile.am: error: required file './AUTHORS' not found
This is likely a result of the --foreign option being removed - see: http://www.yoctoproject.org/docs/1.7/ref-manual/ref-manual.html#migration-1.7-autotools-class-changes Cheers, Paul -- Paul Eggleton Intel Open Source Technology Centre -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
