Yes - correct. I switched out fri2 with emenlow. Scott
>-----Original Message----- >From: yocto-boun...@yoctoproject.org [mailto:yocto- >boun...@yoctoproject.org] On Behalf Of Robert P. J. Day >Sent: Monday, March 02, 2015 12:08 PM >To: Yocto discussion list >Subject: [yocto] kernel dev manual ... KMACHINE/fri2 content seems out of >date > > > again, kernel dev manual, section 3.2: > >"Multiple BSPs can reuse the same KMACHINE name if they are built using the >same BSP description. The "fri2" and "fri2-noemgd" BSP combination in the >meta-intel layer is a good example of two BSPs using the same KMACHINE >value (i.e. "fri2")." > > i don't think that's accurate anymore ... i don't see KMACHINE being used >relative to fri2 stuff. > >rday > >-- > >=========================================================== >============= >Robert P. J. Day Ottawa, Ontario, CANADA > http://crashcourse.ca > >Twitter: http://twitter.com/rpjday >LinkedIn: http://ca.linkedin.com/in/rpjday >=========================================================== >============= >-- >_______________________________________________ >yocto mailing list >yocto@yoctoproject.org >https://lists.yoctoproject.org/listinfo/yocto -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto