Hello,
I'm trying to update from Yocto (Dizzy) 1.7.2 to 1.7.3 for a
Wandboard Quad, but it hangs at the point where u-boot is trying to
start the kernel. I'm guessing maybe this is because my image has u-boot
2014 and I need u-boot 2015? I have read that u-boot 2015 is required
for Yocto 1.8 (Fido), because it has a newer kernel (3.14). But, my
Yocto 1.7.3 build is still the 3.10.17 kernel. Is it possible Bitbake
built this image with u-boot and kernel versions that are not
compatible, or am I missing the real issue?
I am pasting my boot log below, up to the point where it hangs. I
would really appreciate any help.
Thanks, Clay Montgomery
U-Boot 2014.10+fslc+g5fd0b60 (Nov 14 2015 - 17:25:56)
CPU: Freescale i.MX6Q rev1.2 at 792 MHz
Reset cause: POR
Board: Wandboard
I2C: ready
DRAM: 2 GiB
MMC: FSL_SDHC: 0, FSL_SDHC: 1
auto-detected panel HDMI
Display: HDMI (1024x768)
In: serial
Out: serial
Err: serial
Net: FEC [PRIME]
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
reading boot.scr
** Unable to read file boot.scr **
reading zImage
5442368 bytes read in 359 ms (14.5 MiB/s)
Booting from mmc ...
reading imx6q-wandboard.dtb
43370 bytes read in 21 ms (2 MiB/s)
Kernel image @ 0x12000000 [ 0x000000 - 0x530b40 ]
## Flattened Device Tree blob at 18000000
Booting using the fdt blob at 0x18000000
Using Device Tree in place at 18000000, end 1800d969
Starting kernel ...
--
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
