you need to run -c deploy task for that
On Wed, Jan 13, 2016 at 9:48 AM, Sarayu Krishna Sivanandam <sar...@zaikenn.com> wrote: > hi , > > I do see the the linux-dtb.inc included in the linux-ls1 recipe but when i > build the code using > > bitbake -c compile -f linux-ls1 it doesnot re-generate the dtb file in the > deploy/images/ls1021atwr folder . > > Also when i try to rebuild the images like core-image-minimal or core-image > base it does not rebuild any of the images . > > How can i force it to rebuild the dtb image ? > > Thanks and Regards, > Sarayu K S > Tech Lead > Zaikenn Technologies > > On Wed, Jan 13, 2016 at 11:11 PM, Khem Raj <raj.k...@gmail.com> wrote: >> >> >> On Jan 13, 2016, at 4:03 AM, Sarayu Krishna Sivanandam >> <sar...@zaikenn.com> wrote: >> >> hi , >> >> On similar lines i want to rebuild my linux dtb file as i have made some >> changes in my dts file . How can i force it to regenerate the same ? >> >> For example , I use the command bitbake -c compile -f linux-ls1 to >> regenerate the uImage . >> >> Is there is similar command for the linux-dtb generation ? >> >> >> if your kernel recipe is including linux-dtb.inc then it should >> automatically append device tree related activities into standard tasks. >> >> >> Thanks in advance for your help. >> >> Thanks and Regards, >> Sarayu K S >> Tech Lead >> Zaikenn Technologies >> >> On Tue, Jan 12, 2016 at 3:17 PM, Sarayu Krishna Sivanandam >> <sar...@zaikenn.com> wrote: >>> >>> That worked . Thanks !! >>> >>> Thanks and Regards, >>> Sarayu K S >>> Tech Lead >>> Zaikenn Technologies >>> >>> On Tue, Jan 12, 2016 at 2:12 PM, Khem Raj <raj.k...@gmail.com> wrote: >>>> >>>> On Tue, Jan 12, 2016 at 12:32 AM, Sarayu Krishna Sivanandam >>>> <sar...@zaikenn.com> wrote: >>>> > Hi all , >>>> > >>>> > I was initially using the QorIQ-SDK-V1.8 SDK and was using the command >>>> > "bitbake corre-image-full " to generate the full images including the >>>> > uboot >>>> > , the jffs2 filesystem etc as shown below , >>>> > >>>> > -rw-r--r--. 1 sarayu sarayu 30670848 Oct 14 13:46 >>>> > fsl-image-core-ls1021atwr-20151014203509.rootfs.jffs2 >>>> > >>>> > >>>> > Hoe ever now i have moved to the fsl-community-bsp and want to >>>> > generate the >>>> > full images . I am uisng the command "bitbake core-image-full-cmdline" >>>> > as >>>> > the "core-image-full " command was not available . But it still did >>>> > not >>>> > generate the individual filesystem types . It generated a filesystem >>>> > file >>>> > like the below . >>>> > >>>> > -rw-r--r--. 1 sarayu sarayu 24353214 Jan 11 23:12 >>>> > core-image-full-cmdline-ls1021atwr-20160112065953.rootfs.tar.gz >>>> > >>>> > >>>> > Can you please let me know how to generate the jffs2 image in my >>>> > community >>>> > bsp ? Please let me know what i am missing here . >>>> >>>> Add IMAGE_FSTYPES += "jffs2" in your local.conf >>>> >>>> > >>>> > >>>> > Thanks in advance for your help. >>>> > >>>> > Thanks and Regards, >>>> > Sarayu K S >>>> > Tech Lead >>>> > Zaikenn Technologies >>>> > >>>> > -- >>>> > _______________________________________________ >>>> > yocto mailing list >>>> > yocto@yoctoproject.org >>>> > https://lists.yoctoproject.org/listinfo/yocto >>>> > >>> >>> >> >> > -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto