On 14-06-16 15:48, Jeffrey D Boyer wrote:
Sorry, /media is not a symlink and there is no /run/media link or directory
present on my running system. When I insert an SD card, for example, I get a
bit of text on the debug serial port that a card has been detected, but I don't
see a mount point anywhere after that.
root@mySys:/# mmc1: new high speed SDHC card at address 1234
mmcblk1: mmc1:1234 SA04G 3.63 GiB
mmcblk1: p1
It should be noted that if I exclude the " read-only-rootfs" option in the bb
script, a normal read/write kernel image is produced and the action of inserting an SD
card under those conditions will automatically produce a mount point at /media/mmcblk1p1
Apparently your distro or image or whatever is lacking some directories. The
/run/media should have been created automagically.
Are you using udev or mdev for hotplug?
For mdev, I implemented the automounting using /run/media and that should also
work on read-only-rootfs systems. So I can probably figure out what's wrong
with your config.
For udev, I don't have a clue, sorry...
FYI, I'm running 3.14 kernel. Is this a job for aufs? If so, how would I go
about configuring it?
No, it's not related to autofs or aufs or whatever. It's plain simple udev or
mdev.
Kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69 79
E-mail: mike.looijm...@topicproducts.com
Website: www.topicproducts.com
Please consider the environment before printing this e-mail
--
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto