Hej
I am building for the Atmel Evalbaord SAMA5D3x a Yocto Image. It works
fine, but sysroot toolchain is set to soft float instead of hard float.
How can I set the sysroot toolchain to hard float?
My actual configuration:
1.) use meta-atmel layer
2.) in /build/conf/layer.conf -> MACHINE ??= "sama5d3xek"
@meta-atmel:
/conf/machine/sama5d3xek.conf includes sama5d3.inc
in this file:
SOC_FAMILY = "sama5:sama5d3"
DEFAULTTUNE = "cortexa5thf"
I am not understanding why for the sysroot the default tune is not used.
Any ideas are welcome.
Regards!
Stefan Jaritz
------------------------------------------------------------
ESA Elektroschaltanlagen Grimma GmbH
Broner Ring 30
04668 Grimma
Telefon: +49 3437 9211 176
Telefax: +49 3437 9211 26
E-Mail: s.jar...@esa-grimma.de
Internet: www.esa-grimma.de
Geschäftsführer:
Dipl.-Ing. Jörg Gaitzsch
Jörg Reinker
Sitz der Gesellschaft: Grimma
Ust.-ID: DE 141784437
Amtsgericht: Leipzig, HRB 5159
Steuernummer: 238/108/00755
Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte
Informationen.
Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich
erhalten
haben, informieren Sie bitte sofort den Absender und löschen Sie diese
Nachricht. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser
Mail
ist nicht gestattet.
This e-mail may contain confidential and/or privileged information. If you
are
not the intended recipient (or have received this e-mail in error) please
notify the sender immediately and destroy this e-mail. Any unauthorized
copying, disclosure or distribution of the material in this e-mail is
strictly
forbidden.
--
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto