On Sat, Oct 22, 2016 at 08:49:53PM +0100, Paul Barker wrote: > These changes allow u-boot to successfully boot Linux without a manual > sequence > of commands being entered at boot time. This has been tested on an old > Raspberry > Pi B+ as well as a Raspberrypi 3. It should work for other models as well. > > Also, the kernel image is removed from the main rootfs /boot directory as it > is > not needed outside the FAT32 boot partition. > > Changes in V2 (a bit late sorry!): > * Rebased onto latest master > * Address review comments from V1 > * Set COMPATIBLE_MACHINE in rpi-u-boot-scr > > Paul Barker (4): > rpi-base.inc: Don't install kernel image into rootfs > rpi-u-boot-scr: Add recipe to create u-boot boot script > u-boot: Add RDEPENDS on rpi-u-boot-scr > sdcard_image-rpi.bbclass: Include boot script when using u-boot > > classes/sdcard_image-rpi.bbclass | 1 + > conf/machine/include/rpi-base.inc | 4 ++++ > .../rpi-u-boot-scr/files/raspberrypi/boot.cmd | 6 ++++++ > .../rpi-u-boot-scr/files/raspberrypi0/boot.cmd | 6 ++++++ > .../rpi-u-boot-scr/files/raspberrypi2/boot.cmd | 6 ++++++ > .../rpi-u-boot-scr/files/raspberrypi3/boot.cmd | 6 ++++++ > recipes-bsp/rpi-u-boot-scr/rpi-u-boot-scr.bb | 21 > +++++++++++++++++++++ > recipes-bsp/u-boot/u-boot_2016.03.bbappend | 1 + > 8 files changed, 51 insertions(+) > create mode 100644 recipes-bsp/rpi-u-boot-scr/files/raspberrypi/boot.cmd > create mode 100644 recipes-bsp/rpi-u-boot-scr/files/raspberrypi0/boot.cmd > create mode 100644 recipes-bsp/rpi-u-boot-scr/files/raspberrypi2/boot.cmd > create mode 100644 recipes-bsp/rpi-u-boot-scr/files/raspberrypi3/boot.cmd > create mode 100644 recipes-bsp/rpi-u-boot-scr/rpi-u-boot-scr.bb > create mode 100644 recipes-bsp/u-boot/u-boot_2016.03.bbappend > > -- > 2.1.4 >
Thanks Paul for this. I merged these in master. -- Andrei Gherzan
signature.asc
Description: PGP signature
-- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto