On Sun, Nov 20, 2016 at 9:21 PM, Herve Jourdain <herve.jourd...@neuf.fr> wrote: > Hi Khem, > > For cortexa53 in aarch32, the problem is to figure out if we want to cover > all cases or not. > Raspberrypi3 is one case of CortexA53 that has crc support, but no crypto > support. So I could define a cortexa53-32 as being just that. > But then, there are other CortexA53-based SoCs that do have the crypto > extension, and I thought that, since I was going to modify it, I'd rather > cover all possible cases/options... > > The one thing that could be scrapped is the hf option, if we decide that all > cortexa53 aarch32 will be hf only. > Then that would avoid the hf duplication of the aarch32 tunes, leaving only 2 > tunes for cortexa53 aarch32 + 1 tune for cortexa53 aarch64. > > Please advise what you would prefer me to do.
is there an advantage of having crc and crypto as systemwide tune options or is it more beneficial to apply them surgically to needed apps via MACHINE_FEATURES > > Herve > > -----Original Message----- > From: Khem Raj [mailto:raj.k...@gmail.com] > Sent: dimanche 20 novembre 2016 20:30 > To: Herve Jourdain <herve.jourd...@neuf.fr> > Cc: yocto@yoctoproject.org > Subject: Re: [yocto] [meta-raspberrypi][PATCH 1/1] Modify raspberrypi3.conf > and add raspberrypi3-64.conf > > Herve, > > There is no need to create so many variants for a53 32 bit mode. We can keep > using whatever we have its only 64bit that needs to be added as a new machine. > > On Sun, Nov 20, 2016 at 4:06 AM, Herve Jourdain <herve.jourd...@neuf.fr> > wrote: >> Hi Khem, >> >> FYI, I am sending a slightly modified version (cortexa53hf-32 instead >> of >> cortexa53-32 for raspberrypi3.conf). >> They still depend on modifications in oe-core (heavier this time than >> before), also posted to the list. >> >> Herve >> >> -----Original Message----- >> From: Khem Raj [mailto:raj.k...@gmail.com] >> Sent: samedi 19 novembre 2016 19:19 >> To: Herve Jourdain <herve.jourd...@neuf.fr>; yocto@yoctoproject.org >> Subject: Re: [yocto] [meta-raspberrypi][PATCH 1/1] Modify >> raspberrypi3.conf and add raspberrypi3-64.conf >> >> Nevermind, I managed to apply it, there are some CR changes I guess >> which was freaking git >> >> On 11/19/16 5:03 AM, Herve Jourdain wrote: >>> Signed-off-by: Herve Jourdain <herve.jourd...@neuf.fr> >>> --- >>> conf/machine/raspberrypi3-64.conf | 19 +++++++++++++++++++ >>> conf/machine/raspberrypi3.conf | 8 ++++++-- >>> 2 files changed, 25 insertions(+), 2 deletions(-) create mode >>> 100644 conf/machine/raspberrypi3-64.conf >>> >>> diff --git a/conf/machine/raspberrypi3-64.conf >>> b/conf/machine/raspberrypi3-64.conf >>> new file mode 100644 >>> index 0000000..a5ceddb >>> --- /dev/null >>> +++ b/conf/machine/raspberrypi3-64.conf >>> @@ -0,0 +1,19 @@ >>> +#@TYPE: Machine >>> +#@NAME: RaspberryPi 3 Development Board >>> +#@DESCRIPTION: Machine configuration for the RaspberryPi 3 in 64 >>> +bits mode >>> + >>> +DEFAULTTUNE ?= "cortexa53-64" >>> + >>> +MACHINEOVERRIDES = "raspberrypi3:raspberrypi:${MACHINE}" >>> + >>> +MACHINE_EXTRA_RRECOMMENDS += "linux-firmware-bcm43430" >>> + >>> +PREFERRED_VERSION_linux-raspberrypi_raspberrypi3-64 ?= "4.7.%" >>> + >>> +require conf/machine/include/tune-cortexa53.inc >>> +include conf/machine/include/rpi-base.inc >>> + >>> +SERIAL_CONSOLE = "115200 ttyS0" >>> +VC4_CMA_SIZE ?= "cma-256" >>> + >>> +UBOOT_MACHINE = "rpi_3_config" >>> diff --git a/conf/machine/raspberrypi3.conf >>> b/conf/machine/raspberrypi3.conf index 9820209..f142323 100644 >>> --- a/conf/machine/raspberrypi3.conf >>> +++ b/conf/machine/raspberrypi3.conf >>> @@ -2,12 +2,16 @@ >>> #@NAME: RaspberryPi 3 Development Board >>> #@DESCRIPTION: Machine configuration for the RaspberryPi 3 >>> >>> -MACHINEOVERRIDES = "raspberrypi2:${MACHINE}" >>> +DEFAULTTUNE ?= "cortexa53-32" >>> + >>> +MACHINEOVERRIDES = "raspberrypi2:raspberrypi:${MACHINE}" >>> >>> MACHINE_EXTRA_RRECOMMENDS += "linux-firmware-bcm43430" >>> >>> -include conf/machine/raspberrypi2.conf >>> +require conf/machine/include/tune-cortexa53.inc >>> +include conf/machine/include/rpi-base.inc >>> >>> SERIAL_CONSOLE = "115200 ttyS0" >>> VC4_CMA_SIZE ?= "cma-256" >>> >>> +UBOOT_MACHINE = "rpi_3_config" >>> >> >> > -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
