Hello Ross,
Thanks for your reply, but I did not get you, I actually sourced the setup script for the sdk toolchain installed at path /opt/poky/2.1.1/… But I think “make” is somehow calling g++ instead of calling arm-poky-linux-gnueabi-g++. I am not sure about the generated sdk is correct? Alankar From: Burton, Ross [mailto:ross.bur...@intel.com] Sent: 09/12/2016 6:05 PM To: Alankar Dhobale Cc: yocto@yoctoproject.org Subject: Re: [yocto] Qt make: g++: Command not found issue with SDK generated for soloX As per the documentation, the compiler isn't just "gcc" but has the full platform triple in: http://www.yoctoproject.org/docs/2.1/sdk-manual/sdk-manual.html#makefile-based-projects One you've sourced the setup script these are set as $CC and so on, so your makefile should be using $CC instead of 'gcc'. Ross On 9 December 2016 at 11:57, Alankar Dhobale <alankar.dhob...@renuelectronics.com> wrote: i have used following steps to get and build the BSP for soloX sabre board. i am using Krogoth branch to build the bsp and populate sdk https://github.com/Freescale/fsl-community-bsp-platform then i added qt support in the build by following http://wiki.wandboard.org/index.php/Building_Qt5_using_yocto_on_Wandboard after that i bitbaked toolchain for this using following $ bitbake meta-toolchain-qt5 after this i generated sdk using following command $ bitbake <image-name> -c populate_sdk and then i installed the sdk on my development machine, it is installed under /opt/poky/2.1.1/ now i installed and setup latest Qt by using following steps https://community.nxp.com/thread/309578 After all this setup done, i created a simple console application and trying to build it, and i get an error as 14:10:10: Running steps for project HelloWorld... 14:10:10: Configuration unchanged, skipping qmake step. 14:10:10: Starting: "/usr/bin/make" g++ -c -pipe -O2 -std=gnu++0x -Wall -W -D_REENTRANT -fPIC -DQT_NO_DEBUG -DQT_CORE_LIB -I../HelloWorld -I. -I/opt/poky/2.1.1/sysroots/cortexa9hf-neon-poky-linux-gnueabi/usr/include/qt5 -I/opt/poky/2.1.1/sysroots/cortexa9hf-neon-poky-linux-gnueabi/usr/include/qt5/QtCore -I. -I/opt/poky/2.1.1/sysroots/cortexa9hf-neon-poky-linux-gnueabi/usr/lib/qt5/mkspecs/linux-g++ -o main.o ../HelloWorld/main.cpp make: g++: Command not found make: *** [main.o] Error 127 14:10:10: The process "/usr/bin/make" exited with code 2. Error while building/deploying project HelloWorld (kit: mx6solox) The kit mx6solox has configuration issues which might be the root cause for this problem. When executing step "Make" 14:10:10: Elapsed time: 00:00. i have googled a lot but could not find any solution on this. Can somebody please help on this... Kind Regards, Alankar Dhobale -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
-- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto