On Fri 2017-06-16 @ 05:15:40 PM, drew.mose...@mender.io wrote:
> +This script will take some time to execute.
true
> If you have a serial console connected to
> +your board, you will see the progress and a message on the console will
> indicate when
> +the flashing is completed.
hmmm, never saw this. I have a console connected, the moment the script
started, on the console I got:
U-Boot SPL 2016.01 (Jun 19 2017 - 00:32:19)
DRAM: 512 MiB
CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2
Trying to boot from
which looks right, the date+time are good.
Where I started the script I get:
# UBI_IMAGE=core-image-full-cmdline-chip.ubi
# tmp-glibc/deploy/images/chip/flash_CHIP_board.sh
100% [================================================] 3537 kB,
557.5 kB/s
100% [================================================] 616 kB,
823.9 kB/s
100% [================================================] 2 kB,
733.9 kB/s
100% [================================================] 654311 kB,
771.4 kB/s
> Additionally, once the image is properly flashed, the status
> +LED on the CHIP board will flash 30 times per second indicating that it is
> safe to power
> +down your board and disable FEL mode.
I don't get any LED flashing, and nothing other than what I've pasted above on
the console.
Rebooting the board after flashing outside of FEL mode simply boots the
previous u-boot and image.
Any thoughts?
--
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
