> 1: kernel plus initramfs only - runs entirely from RAM after initial booting
> from disk.
Did not understand this requirement?! Wouldn't be better to have the
following: runs entirely from RAM after initial booting from flash?
Zoran
_______
On Sat, Dec 30, 2017 at 8:18 AM, Andrew Stuart
<andrew.stu...@supercoders.com.au> wrote:
> Hi folks,
>
> With Tiny Core Linux I am able to have a kernel file plus an initramfs that
> boots
>
> My goal is to configure Yocto to these requirements:
>
> 1: kernel plus initramfs only - runs entirely from RAM after initial booting
> from disk.
> 2: openssh server installed
> 3: nginx installed
> 4: isc dhcp client installed
> 5: virtualization drivers installed for *both* Xen and KVM - so the same code
> can boot on either virtualization type
>
>
> I’ve spent all day fiddling with every possible variation of
> core-image-minimal-initramfs local.conf and bblayers.conf but nothing I do
> will install any of the packages above into the initramfs that is created
> after running 'bitbake core-image-minimal-initramfs’
>
> I’m out of ideas. Can anyone point me in the right direction please?
>
> thanks!!
>
> Here’s my conf/bblayers.conf and conf.local.conf
>
> ubuntu@ip-10-0-0-63:/opt/mountpoint/poky-rocko-18.0.0/build$ cat
> conf/bblayers.conf
> # POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
> # changes incompatibly
> POKY_BBLAYERS_CONF_VERSION = "2"
>
> BBPATH = "${TOPDIR}"
> BBFILES ?= ""
>
> BBLAYERS ?= " \
> /mnt/home/ubuntu/poky-rocko-18.0.0/meta \
> /mnt/home/ubuntu/poky-rocko-18.0.0/meta-openembedded/meta-filesystems \
> /mnt/home/ubuntu/poky-rocko-18.0.0/meta-openembedded/meta-networking \
> /mnt/home/ubuntu/poky-rocko-18.0.0/meta-openembedded/meta-webserver \
> /mnt/home/ubuntu/poky-rocko-18.0.0/meta-openembedded/meta-oe \
> /mnt/home/ubuntu/poky-rocko-18.0.0/meta-openembedded/meta-python \
> /mnt/home/ubuntu/poky-rocko-18.0.0/openembedded-core/meta \
> /mnt/home/ubuntu/poky-rocko-18.0.0/meta-poky \
> /mnt/home/ubuntu/poky-rocko-18.0.0/meta-virtualization \
> /mnt/home/ubuntu/poky-rocko-18.0.0/meta-yocto-bsp \
> /mnt/home/ubuntu/poky-rocko-18.0.0/oe-meta-go \
> "
>
> ubuntu@ip-10-0-0-63:/opt/mountpoint/poky-rocko-18.0.0/build$
>
>
> ubuntu@ip-10-0-0-63:/opt/mountpoint/poky-rocko-18.0.0/build$ cat
> conf/local.conf
> #
> # This file is your local configuration file and is where all local user
> settings
> # are placed. The comments in this file give some guide to the options a new
> user
> # to the system might want to change but pretty much any configuration option
> can
> # be set in this file. More adventurous users can look at local.conf.extended
> # which contains other examples of configuration which can be placed in this
> file
> # but new users likely won't need any of them initially.
> #
> # Lines starting with the '#' character are commented out and in some cases
> the
> # default values are provided as comments to show people example syntax.
> Enabling
> # the option is a question of removing the # character and making any change
> to the
> # variable as required.
>
> #
> # Machine Selection
> #
> # You need to select a specific machine to target the build with. There are a
> selection
> # of emulated machines available which can boot and run in the QEMU emulator:
> #
> #MACHINE ?= "qemuarm"
> #MACHINE ?= "qemuarm64"
> #MACHINE ?= "qemumips"
> #MACHINE ?= "qemumips64"
> #MACHINE ?= "qemuppc"
> #MACHINE ?= "qemux86"
> MACHINE ?= "qemux86-64"
> #
> # There are also the following hardware board target machines included for
> # demonstration purposes:
> #
> #MACHINE ?= "beaglebone"
> #MACHINE ?= "genericx86"
> #MACHINE ?= "genericx86-64"
> #MACHINE ?= "mpc8315e-rdb"
> #MACHINE ?= "edgerouter"
> #
> # This sets the default machine to be qemux86 if no other machine is selected:
> #MACHINE ??= "qemux86"
> DISTRO_FEATURES_append = " xen"
> EXTRA_IMAGE_FEATURES = "debug-tweaks"
> DISTRO_FEATURES_append = " virtualization"
> #CORE_IMAGE_EXTRA_INSTALL += "openssh-sshd"
> #CORE_IMAGE_EXTRA_INSTALL += "dhcp-client"
> #CORE_IMAGE_EXTRA_INSTALL += "dropbear"
> #CORE_IMAGE_EXTRA_INSTALL += "dropbear"
> #IMAGE_INSTALL_append = " dropbear"
> #IMAGE_INSTALL_append = " packagegroup-core-ssh-openssh"
> IMAGE_INSTALL_append = " ssh-server-openssh"
> IMAGE_INSTALL_append = " dhcp-client"
> IMAGE_INSTALL_append = " nginx"
>
> #
> # Where to place downloads
> #
> # During a first build the system will download many different source code
> tarballs
> # from various upstream projects. This can take a while, particularly if your
> network
> # connection is slow. These are all stored in DL_DIR. When wiping and
> rebuilding you
> # can preserve this directory to speed up this part of subsequent builds.
> This directory
> # is safe to share between multiple builds on the same machine too.
> #
> # The default is a downloads directory under TOPDIR which is the build
> directory.
> #
> #DL_DIR ?= "${TOPDIR}/downloads"
>
> #
> # Where to place shared-state files
> #
> # BitBake has the capability to accelerate builds based on previously built
> output.
> # This is done using "shared state" files which can be thought of as cache
> objects
> # and this option determines where those files are placed.
> #
> # You can wipe out TMPDIR leaving this directory intact and the build would
> regenerate
> # from these files if no changes were made to the configuration. If changes
> were made
> # to the configuration, only shared state files where the state was still
> valid would
> # be used (done using checksums).
> #
> # The default is a sstate-cache directory under TOPDIR.
> #
> #SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
>
> #
> # Where to place the build output
> #
> # This option specifies where the bulk of the building work should be done and
> # where BitBake should place its temporary files and output. Keep in mind that
> # this includes the extraction and compilation of many applications and the
> toolchain
> # which can use Gigabytes of hard disk space.
> #
> # The default is a tmp directory under TOPDIR.
> #
> #TMPDIR = "${TOPDIR}/tmp"
>
> #
> # Default policy config
> #
> # The distribution setting controls which policy settings are used as
> defaults.
> # The default value is fine for general Yocto project use, at least initially.
> # Ultimately when creating custom policy, people will likely end up
> subclassing
> # these defaults.
> #
> DISTRO ?= "poky"
> # As an example of a subclass there is a "bleeding" edge policy configuration
> # where many versions are set to the absolute latest code from the upstream
> # source control systems. This is just mentioned here as an example, its not
> # useful to most new users.
> # DISTRO ?= "poky-bleeding"
>
> #
> # Package Management configuration
> #
> # This variable lists which packaging formats to enable. Multiple package
> backends
> # can be enabled at once and the first item listed in the variable will be
> used
> # to generate the root filesystems.
> # Options are:
> # - 'package_deb' for debian style deb files
> # - 'package_ipk' for ipk files are used by opkg (a debian style embedded
> package manager)
> # - 'package_rpm' for rpm style packages
> # E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
> # We default to rpm:
> PACKAGE_CLASSES ?= "package_rpm"
>
> #
> # SDK target architecture
> #
> # This variable specifies the architecture to build SDK items for and means
> # you can build the SDK packages for architectures other than the machine you
> are
> # running the build on (i.e. building i686 packages on an x86_64 host).
> # Supported values are i686 and x86_64
> #SDKMACHINE ?= "i686"
>
> #
> # Extra image configuration defaults
> #
> # The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the
> generated
> # images. Some of these options are added to certain image types
> automatically. The
> # variable can contain the following options:
> # "dbg-pkgs" - add -dbg packages for all installed packages
> # (adds symbol information for debugging/profiling)
> # "dev-pkgs" - add -dev packages for all installed packages
> # (useful if you want to develop against libs in the
> image)
> # "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
> # (useful if you want to run the package test suites)
> # "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
> # "tools-debug" - add debugging tools (gdb, strace)
> # "eclipse-debug" - add Eclipse remote debugging support
> # "tools-profile" - add profiling tools (oprofile, lttng, valgrind)
> # "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
> # "debug-tweaks" - make an image suitable for development
> # e.g. ssh root access has a blank password
> # There are other application targets that can be used here too, see
> # meta/classes/image.bbclass and meta/classes/core-image.bbclass for more
> details.
> # We default to enabling the debugging tweaks.
> EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
>
> #
> # Additional image features
> #
> # The following is a list of additional classes to use when building images
> which
> # enable extra features. Some available options which can be included in this
> variable
> # are:
> # - 'buildstats' collect build statistics
> # - 'image-mklibs' to reduce shared library files size for an image
> # - 'image-prelink' in order to prelink the filesystem image
> # NOTE: if listing mklibs & prelink both, then make sure mklibs is before
> prelink
> # NOTE: mklibs also needs to be explicitly enabled for a given image, see
> local.conf.extended
> USER_CLASSES ?= "buildstats image-mklibs image-prelink"
>
> #
> # Runtime testing of images
> #
> # The build system can test booting virtual machine images under qemu (an
> emulator)
> # after any root filesystems are created and run tests against those images.
> To
> # enable this uncomment this line. See classes/testimage(-auto).bbclass for
> # further details.
> #TEST_IMAGE = "1"
> #
> # Interactive shell configuration
> #
> # Under certain circumstances the system may need input from you and to do
> this it
> # can launch an interactive shell. It needs to do this since the build is
> # multithreaded and needs to be able to handle the case where more than one
> parallel
> # process may require the user's attention. The default is iterate over the
> available
> # terminal types to find one that works.
> #
> # Examples of the occasions this may happen are when resolving patches which
> cannot
> # be applied, to use the devshell or the kernel menuconfig
> #
> # Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x
> only), none
> # Note: currently, Konsole support only works for KDE 3.x due to the way
> # newer Konsole versions behave
> #OE_TERMINAL = "auto"
> # By default disable interactive patch resolution (tasks will just fail
> instead):
> PATCHRESOLVE = "noop"
>
> #
> # Disk Space Monitoring during the build
> #
> # Monitor the disk space during the build. If there is less that 1GB of space
> or less
> # than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR),
> gracefully
> # shutdown the build. If there is less that 100MB or 1K inodes, perform a
> hard abort
> # of the build. The reason for this is that running completely out of space
> can corrupt
> # files and damages the build in ways which may not be easily recoverable.
> # It's necesary to monitor /tmp, if there is no space left the build will fail
> # with very exotic errors.
> BB_DISKMON_DIRS = "\
> STOPTASKS,${TMPDIR},1G,100K \
> STOPTASKS,${DL_DIR},1G,100K \
> STOPTASKS,${SSTATE_DIR},1G,100K \
> STOPTASKS,/tmp,100M,100K \
> ABORT,${TMPDIR},100M,1K \
> ABORT,${DL_DIR},100M,1K \
> ABORT,${SSTATE_DIR},100M,1K \
> ABORT,/tmp,10M,1K"
>
> #
> # Shared-state files from other locations
> #
> # As mentioned above, shared state files are prebuilt cache data objects
> which can
> # used to accelerate build time. This variable can be used to configure the
> system
> # to search other mirror locations for these objects before it builds the
> data itself.
> #
> # This can be a filesystem directory, or a remote url such as http or ftp.
> These
> # would contain the sstate-cache results from previous builds (possibly from
> other
> # machines). This variable works like fetcher MIRRORS/PREMIRRORS and points
> to the
> # cache locations to check for the shared objects.
> # NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add
> PATH
> # at the end as shown in the examples below. This will be substituted with the
> # correct path within the directory structure.
> #SSTATE_MIRRORS ?= "\
> #file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
> #file://.* file:///some/local/dir/sstate/PATH"
>
>
> #
> # Qemu configuration
> #
> # By default qemu will build with a builtin VNC server where graphical output
> can be
> # seen. The two lines below enable the SDL backend too. By default
> libsdl-native will
> # be built, if you want to use your host's libSDL instead of the minimal
> libsdl built
> # by libsdl-native then uncomment the ASSUME_PROVIDED line below.
> PACKAGECONFIG_append_pn-qemu-native = " sdl"
> PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
> #ASSUME_PROVIDED += "libsdl-native"
>
> # CONF_VERSION is increased each time build/conf/ changes incompatibly and is
> used to
> # track the version of this file when it was generated. This can safely be
> ignored if
> # this doesn't mean anything to you.
> CONF_VERSION = "1"
> ubuntu@ip-10-0-0-63:/opt/mountpoint/poky-rocko-18.0.0/build$
>
>
>
> --
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
--
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
