Headless Raspberry PI 0 W cant get OTG rndis up, i followed the guide and set ENABLE_UART = "1" ENABLE_DWC2_PERIPHERAL = "1"
current config is MACHINE ??= "raspberrypi0-wifi" SERIAL_CONSOLE = "" ENABLE_UART = "1" ENABLE_DWC2_PERIPHERAL = "1" DISABLE_RPI_BOOT_LOGO = "1" DISABLE_OVERSCAN = "1" DISABLE_SPLASH = "1" BOOT_DELAY = "0" GPU_MEM_256 = "128" GPU_MEM_512 = "196" GPU_MEM_1024 = "396" DISTRO_FEATURES_remove = "x11" DISTRO_FEATURES_append = " opengl" PACKAGE_CLASSES = "package_ipk" IMAGE_INSTALL_append = " chrony" IMAGE_INSTALL_append = " linux-firmware-bcm43430 wpa-supplicant" IMAGE_FSTYPES = "tar.bz2 ext4 rpi-sdimg" SDIMG_ROOTFS_TYPE = "ext4" CORE_IMAGE_EXTRA_INSTALL += "openssh" DISTRO_FEATURES_append += "bluez5 bluetooth wifi" as following the docs it stated ENABLE_UART = "1" ENABLE_DWC2_PERIPHERAL = "1" for OTG, buut i dont seem to see any rndis on my laptop via thhe second poort, Rasbian / DietPI work fine, so do i need to edit the config.txt and cmdline.txt like in Raspbian? also do we need a ssh file in boot as also with Raspbian ? Edit the file config.txt and add dtoverlay=dwc2 on its own line at the end. Edit the file cmdline.txt and add modules-load=dwc2,g_ether right after it says rootwait Thanks in Advance -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto