That is... interesting. Can you verify that this file has been built by gtk+3?
$ oe-pkgdata-util find-path '*/gdk-x11-3.0.pc' gtk+3-dev: /usr/lib/pkgconfig/gdk-x11-3.0.pc If so can you find any gdk-x11-3.0.pc files under /opt/yocto/build/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/matchbox-panel-2/2.11-r0/recipe-sysroot? Probably under usr/lib/pkgconfig. Ross On Mon, 29 Oct 2018 at 19:34, Joe Flowers <joe.flow...@nofreewill.com> wrote: > > HI Ross, > > It still doesn't work. > > > local.conf > https://pastebin.com/2Ng0wSCi > > > log.do_configure.27655 > https://pastebin.com/4EX9vqmK > > > config.log > https://pastebin.com/DY2FnM7w > > > Thanks for trying to help me. > > Joe > ---------------- > > > On Mon, Oct 29, 2018 at 11:43 AM Burton, Ross <ross.bur...@intel.com> wrote: >> >> x11 is in the default DISTRO_FEATURES for poky, so you don't need to add >> that. >> >> If core-image-x11 works then core-image-sato should build fine. Try >> deleting your tmp/ and trying again, if that doesn't work then >> pastebin both temp/log.do_configure and config.log from the recipe >> that is failing (matchbox-panel). >> >> Ross >> On Mon, 29 Oct 2018 at 13:21, Joe Flowers <joe.flow...@nofreewill.com> wrote: >> > >> > Thanks, Ross. >> > >> > 1. >> > Both of these commands worked: >> > >> > MACHINE=wandboard bitbake core-image-x11 >> > MACHINE=wandboard bitbake gtk+3 >> > >> > 2. >> > I've attached my local.conf. >> > >> > If the attachment does not go through, then I will copy and paste it into >> > my next message. >> > >> > Thanks! >> > >> > Joe >> > ------------------------------- >> > >> > >> > On Mon, Oct 29, 2018 at 7:54 AM Burton, Ross <ross.bur...@intel.com> wrote: >> >> >> >> Can you share your local.conf? Does bitbake gtk+3 work? >> >> >> >> Ross >> >> On Mon, 29 Oct 2018 at 06:42, Joe Flowers <joe.flow...@nofreewill.com> >> >> wrote: >> >> > >> >> > Hello everyone, >> >> > >> >> > 1. >> >> > I am trying to build a core-image-sato image for a WandBoard but am >> >> > getting stuck at this error message: >> >> > >> >> > "| No package 'gdk-x11-3.0' found" >> >> > >> >> > See below for more details. >> >> > >> >> > >> >> > 2. >> >> > I have grepped this list's archives and run into someone with the same >> >> > problem, but a solution was never included in the thread. >> >> > >> >> > https://lists.yoctoproject.org/pipermail/yocto/2017-December/039149.html >> >> > >> >> > >> >> > Help please. >> >> > >> >> > Joe >> >> > >> >> > ------------------------------ >> >> > >> >> > Command >> >> > >> >> > MACHINE=wandboard bitbake core-image-sato >> >> > >> >> > produces this error message: >> >> > >> >> > ... >> >> > ... >> >> > | checking for pkg-config... >> >> > /opt/yocto/build/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/matchbox-panel-2/2.11-r0/recipe-sysroot-native/usr/bin/pkg-config >> >> > | configure: WARNING: using cross tools not prefixed with host triplet >> >> > | checking pkg-config is at least version 0.9.0... yes >> >> > | checking for glib-2.0 >> >> > | gmodule-export-2.0 >> >> > | x11 >> >> > | gdk-x11-3.0 >> >> > | gtk+-3.0... no >> >> > | configure: error: Package requirements (glib-2.0 >> >> > | gmodule-export-2.0 >> >> > | x11 >> >> > | gdk-x11-3.0 >> >> > | gtk+-3.0) were not met: >> >> > | >> >> > | No package 'gdk-x11-3.0' found >> >> > | >> >> > | Consider adjusting the PKG_CONFIG_PATH environment variable if you >> >> > | installed software in a non-standard prefix. >> >> > | >> >> > | Alternatively, you may set the environment variables >> >> > MATCHBOX_PANEL_CFLAGS >> >> > | and MATCHBOX_PANEL_LIBS to avoid the need to call pkg-config. >> >> > | See the pkg-config man page for more details. >> >> > | NOTE: The following config.log files may provide further information. >> >> > | NOTE: >> >> > /opt/yocto/build/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/matchbox-panel-2/2.11-r0/build/config.log >> >> > | ERROR: configure failed >> >> > | WARNING: exit code 1 from a shell command. >> >> > | ERROR: Function failed: do_configure (log file is located at >> >> > /opt/yocto/build/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/matchbox-panel-2/2.11-r0/temp/log.do_configure.40754) >> >> > ERROR: Task >> >> > (/opt/yocto/sources/poky/meta/recipes-sato/matchbox-panel-2/matchbox-panel-2_2.11.bb:do_configure) >> >> > failed with exit code '1' >> >> > NOTE: Tasks Summary: Attempted 3024 tasks of which 2828 didn't need to >> >> > be rerun and 1 failed. >> >> > >> >> > Summary: 1 task failed: >> >> > >> >> > /opt/yocto/sources/poky/meta/recipes-sato/matchbox-panel-2/matchbox-panel-2_2.11.bb:do_configure >> >> > Summary: There were 2 ERROR messages shown, returning a non-zero exit >> >> > code. >> >> > joe@ubuntu:/opt/yocto/build$ >> >> > >> >> > ------------------------------ >> >> > >> >> > -- >> >> > _______________________________________________ >> >> > yocto mailing list >> >> > yocto@yoctoproject.org >> >> > https://lists.yoctoproject.org/listinfo/yocto -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto