Hi Holzmayr and Heiko, My problem was solved with your advices. I edited the serial console variable on the machine conf file of my custom machine. It's work fine. Thank's
n.stanisavljevic -----Message d'origine----- De : Heiko Schocher <h...@denx.de> Envoyé : lundi 3 décembre 2018 05:42 À : n.stanisavlje...@polycaptil.fr Cc : Josef Holzmayr <holzm...@rsi-elektrotechnik.de>; yocto@yoctoproject.org Objet : Re: [yocto] am335x evmsk screen init:id"00" respawning too fast disabled for 5 minutes yocto sumo Hi n.stanisavljevic, Am 28.11.2018 um 20:55 schrieb Josef Holzmayr: > Howdy! > > On Wed, Nov 28, 2018 at 03:50:02PM +0000, n.stanisavlje...@polycaptil.fr > wrote: >> Hello everybody >> >> here is an introduction of my situation : >> >> I build a custom board from schematic of sitara AM335x-evmsk starter kit. >> I succeed to make a custom OS with yocto (krogoth version) and to boot this >> OS (embedded Linux) on my custom board. >> >> This custom board contain a touchscreen (same touchscreen like in the >> AM335x-evmsk starter kit). >> >> All worked fine on this board while I used krogoth version on yocto. >> >> my problem : >> >> Few time ago, I decided to migrate to sumo version of yocto. >> I build with success the OS (embedded Linux) with yocto sumo version for my >> custom board, but when I try to boot this OS, it's stop/lock and print the >> following message : >> >> "INIT:Id'00' respawning too fast : disabled for 5 minutes" (I put a >> screenshot of this message ridden on putty). >> Every 5 minutes I got this message and I can't acces to the user session on >> putty and on the touchscreen, all board is locked. > > This is probably because you are basing off something that sets > SERIAL_CONSOLES for the yocto-kernel, like > http://git.yoctoproject.org/cgit/cgit.cgi/meta-yocto/tree/meta-yocto-b > sp/conf/machine/beaglebone-yocto.conf?h=master#n23 > > If you are using a custom tree which does not use the special driver > for the uart, then you should be fine by setting SERIAL_CONSOLES ?= > "115200;ttyS0" > in your MACHINE config Yep, see also my patch: https://www.mail-archive.com/yocto@yoctoproject.org/msg42383.html may it help you ... bye, Heiko > >> >> I don't understand why this problem appear when I build a OS with the sumo >> version on Yocto. >> I have not this problem when I build a OS with the krogoth version on yocto. >> >> Somebody can help me to solve this problem ? >> what can I do ? >> > > Greetz > -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: h...@denx.de -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto