Hi Don, I can't really advise you on this as I am not a Yocto developer. However, I can forward this question to the yocto@yoctoproject.org mail group and, in particular, to a resource that is looking closely at kernel stuff to help improve that manual and get it more up-to-date. That guy is named Richard Griffiths of Intel. You should be able to get some help with this. Sorry... I wish I was a crack YP developer :)
Thanks, Scott On Sun, Jan 27, 2019 at 11:50 AM Don Osmond <dosm...@comporium.net> wrote: > Scott > > I have been reading your > https://www.yoctoproject.org/docs/2.4/kernel-dev/kernel-dev.html and it > has been very helpful. I have a project where I am needing to get the > ability to use iptables NAT which does not come in the core image from Digi > which also uses Yocto. In my Ubuntu 16.04 LTS development VM, I am able to > build the base image (bitbake dey-image-qt), menuconfig the kernel config > (bitbake -c devshell virtual/kernel), compile the kernel (bitbake -C > compile virtual/kernel). The results are in the > /workspace/ccimx6ulsbc/tmp/deploy/images/ccimx6ulsbc as see in list below: > > > > dosmond@ubuntu:/workspace/ccimx6ulsbc/tmp/deploy/images/ccimx6ulsbc$ ls > > boot.scr > > dey-image-qt-x11-ccimx6ulsbc-20190127164412.boot.ubifs > > dey-image-qt-x11-ccimx6ulsbc-20190127164412.recovery.ubifs > > dey-image-qt-x11-ccimx6ulsbc-20190127164412.rootfs.manifest > > dey-image-qt-x11-ccimx6ulsbc-20190127164412.rootfs.tar.bz2 > > dey-image-qt-x11-ccimx6ulsbc-20190127164412.rootfs.ubifs > > dey-image-qt-x11-ccimx6ulsbc-20190127164412.testdata.json > > dey-image-qt-x11-ccimx6ulsbc.boot.ubifs > > dey-image-qt-x11-ccimx6ulsbc.manifest > > dey-image-qt-x11-ccimx6ulsbc.recovery.ubifs > > dey-image-qt-x11-ccimx6ulsbc.tar.bz2 > > dey-image-qt-x11-ccimx6ulsbc.testdata.json > > dey-image-qt-x11-ccimx6ulsbc.ubifs > > > dey-image-recovery-initramfs-ccimx6ulsbc-20190127161551.rootfs.cpio.gz.u-boot.tf > > dey-image-recovery-initramfs-ccimx6ulsbc-20190127161551.rootfs.manifest > > dey-image-recovery-initramfs-ccimx6ulsbc-20190127161551.testdata.json > > dey-image-recovery-initramfs-ccimx6ulsbc.cpio.gz.u-boot.tf > > dey-image-recovery-initramfs-ccimx6ulsbc.manifest > > dey-image-recovery-initramfs-ccimx6ulsbc.testdata.json > > imx6ul-ccimx6ulsbc.dtb > > imx6ul-ccimx6ulsbc-id135.dtb > > imx6ul-ccimx6ulsbc-id136.dtb > > imx6ul-ccimx6ulsbc-wb.dtb > > install_linux_fw_sd.scr > > modules--4.9-r0.5-ccimx6ulsbc-20190127182701.tgz > > modules-ccimx6ulsbc.tgz > > u-boot-ccimx6ulsbc1GB-2017.03-r0.imx > > u-boot-ccimx6ulsbc1GB.imx > > u-boot-ccimx6ulsbc-2017.03-r0.imx > > u-boot-ccimx6ulsbc.imx > > u-boot-ccimx6ulsbc.imx-ccimx6ulsbc > > u-boot-ccimx6ulsbc.imx-ccimx6ulsbc1GB > > u-boot.imx > > zImage > > zImage--4.9-r0.5-ccimx6ulsbc-20190127182701.bin > > zImage--4.9-r0.5-imx6ul-ccimx6ulsbc-20190127182701.dtb > > zImage--4.9-r0.5-imx6ul-ccimx6ulsbc-id135-20190127182701.dtb > > zImage--4.9-r0.5-imx6ul-ccimx6ulsbc-id136-20190127182701.dtb > > zImage--4.9-r0.5-imx6ul-ccimx6ulsbc-wb-20190127182701.dtb > > zImage-ccimx6ulsbc.bin > > zImage-imx6ul-ccimx6ulsbc.dtb > > zImage-imx6ul-ccimx6ulsbc-id135.dtb > > zImage-imx6ul-ccimx6ulsbc-id136.dtb > > zImage-imx6ul-ccimx6ulsbc-wb.dtb > > > > So, what I am having an issue with are the steps to get the latest kernel > changes a part of the image? I thought if I ran “bitbake dey-image-qt” > again that it would. I think I am missing something. Anything you can > share would be greatly appreciated. > > Thanks > > Don >
-- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto