Thanks Gabriele, you are right, it did not work in command line but it did not complain after UBOOT_CONFIG = "nand" to local.conf, how can I am sure it is built to boot from nand? I don't have a board to try yet.
Thank you very much. Kind regards, - jh On 7/2/19, Gabriele Zampieri <gabbla.mal...@gmail.com> wrote: > Hi, > > you must use double quotes around nand, so: > UBOOT_CONFIG = "nand" > > However I cannot guarantee this line will be the solution, I usually use a > customized uboot. > > Gabriele > > Il giorno mar 2 lug 2019 alle ore 04:07 JH <jupiter....@gmail.com> ha > scritto: > >> Hi, >> >> The imx6ullevk.conf defined sdcard for booting on imx6 EVK: >> >> imx6ullevk.conf >> >> UBOOT_CONFIG ??= "sd" >> UBOOT_CONFIG[sd] = "mx6ull_14x14_evk_config,sdcard" >> UBOOT_CONFIG[mfgtool] = "mx6ull_14x14_evk_config" >> >> I need to change it for a customized board referenced from imx6 EVK >> but booting from NAND, there are some blogs said it can be done to add >> UBOOT_CONFIG=nand either in local.conf or command line. I tried it did >> not work: >> >> ERROR: Unable to start bitbake server (None) >> --- Starting bitbake server pid 2673 at 2019-07-02 11:54:24.011086 --- >> ERROR: local.conf:34: unparsed line: 'UBOOT_CONFIG=nand' >> >> What should be a proper process to overwrite imx6ullevk.conf >> UBOOT_CONFIG from sdcard to nand? >> >> Thank you. >> >> Kind regards, >> >> - JH >> -- >> _______________________________________________ >> yocto mailing list >> yocto@yoctoproject.org >> https://lists.yoctoproject.org/listinfo/yocto >> > -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto