> You defniitely need hotplug enabled in your .config, but the point is
> that the script I posted is sufficient to get the firmware in your
> zd1211. You don't need the hotplug usermode package if you put that
> script to /sbin/hotplug and chmod +x it.
Hotplugging now works, and I can use zd1211rw kernel shipped driver
without udev, many thanks Andy.
I took your script and renamed it to what /proc/sys/kernel/hotplug says,
many thanks remco.
A new Problem is booting with the stick plugged in.
syslog says the following:
device descriptor read/64, error -110
device descriptor read/64, error -110
device descriptor read/64, error -110
device not accepting address 5, error -110
device not accepting address 6, error -110
and so on.. address after address
After unplugging and again plugging in the stick everything works.
regards, Stephan
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Zd1211-devs mailing list - http://zd1211.ath.cx/
Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs