Le lundi 14 décembre 2009 à 09:26 +0100, Benoit PAPILLAULT a écrit :
> First, you need to run "iperf -s" on a server machine (not on your PC, best
> is a
> machine on your wired LAN). Then, you need to run "iperf -c <server_IP>" on
> your
> PC. It will connect to the iperf server and sends a TCP stream for 10 seconds.
> After 10 seconds, it will display the throughput measured. A better command
> is :
> "iperf -c <server_IP> -i 1 -t 60" => iperf will run for 60s instead of 10s and
> will display throughput every seconds.
I tried it between two of my computers, both on wireless, the client
being the one using a zd1211rw chip.
If i don't manually set the bitrate to 1M, I don't get any throughput.
If I set it to 54M, I get
* on the server side : [ 4] 0.0-11.6 sec 3.73 MBytes 2.70 Mbits/sec
* on the client side : [ 3] 0.0-10.3 sec 3.73 MBytes 3.05 Mbits/sec
But the rc_stats file still contains only zeroes :
rate throughput ewma prob this prob this succ/attempt success
attempts
TtP 1 0.0 0.0 0.0 2( 0) 0
0
2 0.0 0.0 0.0 0( 0) 0
0
5.5 0.0 0.0 0.0 0( 0) 0
0
11 0.0 0.0 0.0 0( 0) 0
0
6 0.0 0.0 0.0 0( 0) 0
0
9 0.0 0.0 0.0 0( 0) 0
0
12 0.0 0.0 0.0 0( 0) 0
0
18 0.0 0.0 0.0 0( 0) 0
0
24 0.0 0.0 0.0 0( 0) 0
0
36 0.0 0.0 0.0 0( 0) 0
0
48 0.0 0.0 0.0 0( 0) 0
0
54 0.0 0.0 0.0 0( 0) 0
0
Total packet count:: ideal 2831 lookaround 149
Thanks for your help,
Julien.
------------------------------------------------------------------------------
Return on Information:
Google Enterprise Search pays you back
Get the facts.
http://p.sf.net/sfu/google-dev2dev
_______________________________________________
Zd1211-devs mailing list - http://zd1211.wiki.sourceforge.net/
Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs