Hmm, looks a bit different but still not right:
Node 1: Zen latency is UP on GRP-ZEN-01s 10.200.28.173 | Zen latency is DOWN on GRP-ZEN-02s 10.200.28.174 Cluster IP 10.200.28.175 is active on GRP-ZEN-01s Host key verification failed. Zen Inotify is running on GRP-ZEN-01s Host key verification failed. Global status: Node 2: Zen latency is UP on GRP-ZEN-02s 10.200.28.174 | Zen latency is DOWN on GRP-ZEN-01s 10.200.28.173 Cluster IP 10.200.28.175 is active on GRP-ZEN-02s Host key verification failed. Zen Inotify is running on GRP-ZEN-02s Host key verification failed. Global status: David From: Emilio Campos [mailto:[email protected]] Sent: 10 October 2011 22:28 To: [email protected] Subject: Re: [Zenloadbalancer-support] Cluster Active on both nodes at the same time David, I just developed the patch that fix the problem reported by you, could you help us with your test and send us your feedback? Please write my file attached on /usr/local/zenloadbalancer/www/, rewriting the actual file Disable the cluster configuration, delete the eth0:cl interface on both nodes and repeat the proccess from the begining. We would like to know if with this change all is working fine We are waiting your feedback! Thanks and regards 2011/10/10 Emilio Campos <[email protected]> HI David, I just detected a problem on cluster configuration, from node backup to node master We going to solve for v1 stable Thanks about your reports! 2011/10/10 David Martin (IT) <[email protected]> Hi, I'm new to Zen and was hoping to get some advice. I have configured two boxes, grp-zen-01s and grp-zen-02s, and am struggling to get clustering to work. I get no errors when configuring the cluster, but when I am finished I get the following status: Zen latency is UP on GRP-ZEN-02s 10.200.28.174 | Zen latency is UP on GRP-ZEN-01s 10.200.28.173 Cluster IP 10.200.28.175 is active on GRP-ZEN-02s Cluster is active on GRP-ZEN-01s Zen Inotify is running on GRP-ZEN-02s GRP-ZEN-01s Global status: >From what I can see, the VIP and Inotify should only be active on one node. I'm guessing the Passive node is having difficulty seeing the active node so it is 'going active' too. The only 'unusual' bit of my setup is that both nodes are running on VMWare vSphere 5 hosts (the same host for testing, actually). I'm wondering if that could be part of the issue but I can't see how. I built one node (but no cluster or farm config) and then cloned it to get the second. I think I have caught all the IDs that I need to change (IP address, hostname, mac address, etc) but, in case I have missed something, I am going to build another node from scratch tomorrow and see if that makes a difference. Is there anything else that uniquely identifies a Zen node? Thanks in advance. Regards David Johnston Press plc Registered in Scotland no. SC015382 Registered Office:108 Holyrood Road, Edinburgh, EH8 8AS Opinions expressed in this email are those of the writer and not the company. E-mail traffic is monitored within Johnston Press and messages may be viewed. This e-mail and any files with it are solely for the use of the addressee(s). If you are not the intended recipient, you have received this e-mail in error. Please delete it or return it to the sender or notify us by email at [email protected] ------------------------------------------------------------------------ ------ All the data continuously generated in your IT infrastructure contains a definitive record of customers, application performance, security threats, fraudulent activity and more. Splunk takes this data and makes sense of it. Business sense. IT sense. Common sense. http://p.sf.net/sfu/splunk-d2dcopy1 _______________________________________________ Zenloadbalancer-support mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support -- Load balancer distribution - Open Source Project http://www.zenloadbalancer.com Distribution list (subscribe): [email protected] -- Load balancer distribution - Open Source Project http://www.zenloadbalancer.com Distribution list (subscribe): [email protected] Johnston Press plc Registered in Scotland no. SC015382 Registered Office:108 Holyrood Road, Edinburgh, EH8 8AS Opinions expressed in this email are those of the writer and not the company. E-mail traffic is monitored within Johnston Press and messages may be viewed. This e-mail and any files with it are solely for the use of the addressee(s). If you are not the intended recipient, you have received this e-mail in error. Please delete it or return it to the sender or notify us by email at [email protected]
<<image001.png>>
<<image002.png>>
------------------------------------------------------------------------------ All the data continuously generated in your IT infrastructure contains a definitive record of customers, application performance, security threats, fraudulent activity and more. Splunk takes this data and makes sense of it. Business sense. IT sense. Common sense. http://p.sf.net/sfu/splunk-d2d-oct
_______________________________________________ Zenloadbalancer-support mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support
