UPDATE:

    I found the issue and it is now working ..

ISSUE: Jumbo Frames (commented it out in /etc/network/interfaces/) , rebooted and all is happy!

This software is just AWESOME! thank you everyone for a great package!

Daniel.

http://www.iglobalnetworks.com/


On 6/5/2012 12:15 AM, stanley kyaw wrote:
Hi Daniel,

Thanks for providing detail steps to reproduce. Let me reproduce this on my side. I will get back to you as soon as I can though I am juggling a lot of other issues currently.


Regards,
Myo

On Tue, Jun 5, 2012 at 10:49 AM, Daniel Ribelin <[email protected] <mailto:[email protected]>> wrote:

    Hi Stanley,

        Thanks for the quick reply. Here are my configs and the steps
    I used to get it working, now, if I only use 1 ZLB and not the
    cluster I am all good .. but I need to have 2 ZLB's online - and
    the servers I am using are dell 1750's with quad xeons, scsi hdds,
    and 8 gigs ram .. 2 broadcom nic's..

    1. Did apt-get install ifenslave-2.6

    2. created new interfaces (/etc/network/interfaces)

    # The primary network interface lb01
    auto bond0
    iface bond0 inet static
        address x.x.x.10
        netmask 255.255.255.0
        network x.x.x.0
        gateway x.x.x.1
        slaves eth0 eth1
        # jumbo frame support
        mtu 9000
        # Load balancing and fault tolerance
        bond-mode balance-rr
        bond-miimon 100
        bond-downdelay 200
        bond-updelay 200
        dns-nameservers a.a.a.a
        dns-search localhost

    ------ lb02 interfaces config....

    # The primary network interface lb02
    auto bond0
    iface bond0 inet static
        address x.x.x.11
        netmask 255.255.255.0
        network x.x.x.0
        gateway x.x.x.1
        slaves eth0 eth1
        # jumbo frame support
        mtu 9000
        # Load balancing and fault tolerance
        bond-mode balance-rr
        bond-miimon 100
        bond-downdelay 200
        bond-updelay 200
        dns-nameservers a.a.a.a
        dns-search localhost

3. Removed in /usr/local/zenloadbalancer/config/ iface_eth0_conf and iface_eth1_conf on both lb01 and lb02

    4. Created iface_bond0_conf in /usr/local/zenloadbalancer/config/
    on both lb01 and lb02
    bond0::x.x.x.10:255.255.255.0:up::

    5. reboot the ZLB (lb01 and lb02)

    6. do the exact same to my second server lb02 but with x.x.x.11 as
    the IP address

    7. login to web interface on lb01, and it shows bond0 (x.x.x.10),
    eth0 (-), and eth1 (-) so, eth0 and eth1 have no IP addresses -
    all good..
        note: the interface is green on all 3 .. and unpluging eth0 or
    eth1 does go red.. so on the OS level I know its working..

    8. Test it, pings google just fine, unplug eth0 traffic flows,
    plug in eth0, unplug eth1 traffic flows, plug back in.. all good..

    9. create virtual interface bond0:1 x.x.x.40 ip address and it
    works just fine, same test as above and traffic flows..

    10. in the web gui settings/cluster (bond0:1) x.x.x.40 .. "save
    vip" -- all good..

    11. local hostname lb01 eth0 IP x.x.x.10

    12. remote hostname lb02 eth0 IP x.x.x.11

    13. cluster ID : 1 "save" -- all good ..

    14. Remote Hostname root password : <*************> "configure RSA
    connection between nodes"

    15. SUCCESS! Running process for configure RSA comunication.  ---
    all good .. note: communication is spelled incorrectly :-)

    16. Cluster Type:  lb01 master and lb02 backup automatic failback,
    click "configure cluster type" .. -- just hangs here forever,
    never changes screens, nothing happens..









    On 6/4/2012 9:10 PM, stanley kyaw wrote:
    Hi Daniel,

    My name is Stanley and nice to meet you here. I will try my best
    to help you on the issue. After reading the provided information,
    I am not really sure what is the issue yet, however, if you can
    provide configurations from both active and standby unit, then I
    can import to our lab units to reproduce the issue.


    Regards,
    Stanley

    On Tue, Jun 5, 2012 at 5:52 AM, Daniel Ribelin
    <[email protected] <mailto:[email protected]>>
    wrote:

        I have been attempting to get this working, and I have to a
        point, if I am only using one load balancer then everything
        works just fine.
        however, when I attempt to make a cluster it just hangs there
        ... I am guessing that somewhere there is a hard coded "eth0" ..

        Has anyone else tried this?

        I am using ZLB v2 and ifenslave-2.6 ..

        Regards,

        Daniel Ribelin.

        
------------------------------------------------------------------------------
        Live Security Virtual Conference
        Exclusive live event will cover all the ways today's security and
        threat landscape has changed and how IT managers can respond.
        Discussions
        will include endpoint security, mobile security and the
        latest in malware
        threats.
        http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
        _______________________________________________
        Zenloadbalancer-support mailing list
        [email protected]
        <mailto:[email protected]>
        https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support




    
------------------------------------------------------------------------------
    Live Security Virtual Conference
    Exclusive live event will cover all the ways today's security and
    threat landscape has changed and how IT managers can respond. Discussions
    will include endpoint security, mobile security and the latest in malware
    threats.http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/


    _______________________________________________
    Zenloadbalancer-support mailing list
    [email protected]  
<mailto:[email protected]>
    https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support

    
------------------------------------------------------------------------------
    Live Security Virtual Conference
    Exclusive live event will cover all the ways today's security and
    threat landscape has changed and how IT managers can respond.
    Discussions
    will include endpoint security, mobile security and the latest in
    malware
    threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
    _______________________________________________
    Zenloadbalancer-support mailing list
    [email protected]
    <mailto:[email protected]>
    https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support




------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/


_______________________________________________
Zenloadbalancer-support mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support

<<attachment: daniel.vcf>>

Attachment: smime.p7s
Description: S/MIME Cryptographic Signature

------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and 
threat landscape has changed and how IT managers can respond. Discussions 
will include endpoint security, mobile security and the latest in malware 
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
Zenloadbalancer-support mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support

Reply via email to