Ok I found the configuration
/usr/local/zenloadbalancer/app/mini_httpd/mini_httpd.conf
Do I just modify this to listen on the IP address I want under host instead of
the * ?
From: [email protected]
To: [email protected]
Date: Mon, 29 Jul 2013 14:51:38 -0400
Subject: Re: [Zenloadbalancer-support] Hot spare and LB Algorithm
Thanks for the help. Is the issue with Zen listening on all 443 ports?
netstat -putan | grep 443
tcp6 0 0 :::443 :::* LISTEN
15480/mini_httpd
/usr/local/zenloadbalancer/app/mini_httpd/mini_httpd -C
/usr/local/zenloadbalancer/app/mini_httpd/mini_httpd.conf
Date: Fri, 26 Jul 2013 15:07:15 +0200
From: [email protected]
To: [email protected]
Subject: Re: [Zenloadbalancer-support] Hot spare and LB Algorithm
Some service or old config farm is running in that ip and port
Chech what PID is looking your configuration process in a shell console and
kill it
netstat -putan | grep 443
It will say you the PID
El 26/07/2013 14:54, "Nick -" <[email protected]> escribió:
Sorry email was accidentally sent before I finished typing the email.
Thanks. That seems to work. I have one farm with port 80 assigned to IP
10.203.21.24. When I go to try to add another farm for port 443 on the same IP
address I am getting an error that 443 is already in use for IP 10.203.21.24.
But I only have one farm with 10.203.21.24 on 80.
Date: Fri, 26 Jul 2013 08:40:35 +0200
From: [email protected]
To: [email protected]
Subject: Re: [Zenloadbalancer-support] Hot spare and LB Algorithm
ErrXXX fields only accept HTML code, you could write a few HTML lines for
redirect with success.
Regards
2013/7/26 Nick - <[email protected]>
Thanks for the update. With the Err500, can it display a site instead of just a
message?
Thanks,
Nick
Date: Thu, 25 Jul 2013 20:27:17 +0200
From: [email protected]
To: [email protected]
Subject: Re: [Zenloadbalancer-support] Hot spare and LB Algorithm
Hi Nick
1) Least connections algorithm isn't implemented yet.
2) If you are working with HTTP[S] farm you can try with personalized error
messages, Err500 will run once all your backends goes down.
2013/7/24 Nick - <[email protected]>
Hi All,
I have setup two test servers for a POC and everything appears to be running
perfectly with failover in 3.02. I do have two questions that I was hoping
someone could answer.
1) I don't see (unless I am not reading the admin guide correctly) a LB
Algorithm that will determine the least connections and route the request to
that backend server. We are currently using Coyotepoints and they use the term
adaptive for this.
2) Is there a way to configure a backend server as hot spare? We use in our
environment a maintenance page if all application servers are down from a
reboot or application issue.
Thanks,
Nick
------------------------------------------------------------------------------
See everything from the browser to the database with AppDynamics
Get end-to-end visibility with application monitoring from AppDynamics
Isolate bottlenecks and diagnose root cause in seconds.
Start your free trial of AppDynamics Pro today!
http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
_______________________________________________
Zenloadbalancer-support mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support
--
Load balancer distribution - Open Source Project
http://www.zenloadbalancer.com
Distribution list (subscribe): [email protected]
------------------------------------------------------------------------------
See everything from the browser to the database with AppDynamics
Get end-to-end visibility with application monitoring from AppDynamics
Isolate bottlenecks and diagnose root cause in seconds.
Start your free trial of AppDynamics Pro today!
http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
_______________________________________________
Zenloadbalancer-support mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support
------------------------------------------------------------------------------
See everything from the browser to the database with AppDynamics
Get end-to-end visibility with application monitoring from AppDynamics
Isolate bottlenecks and diagnose root cause in seconds.
Start your free trial of AppDynamics Pro today!
http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
_______________________________________________
Zenloadbalancer-support mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support
--
Load balancer distribution - Open Source Project
http://www.zenloadbalancer.com
Distribution list (subscribe): [email protected]
------------------------------------------------------------------------------
See everything from the browser to the database with AppDynamics
Get end-to-end visibility with application monitoring from AppDynamics
Isolate bottlenecks and diagnose root cause in seconds.
Start your free trial of AppDynamics Pro today!
http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
_______________________________________________
Zenloadbalancer-support mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support
------------------------------------------------------------------------------
See everything from the browser to the database with AppDynamics
Get end-to-end visibility with application monitoring from AppDynamics
Isolate bottlenecks and diagnose root cause in seconds.
Start your free trial of AppDynamics Pro today!
http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
_______________________________________________
Zenloadbalancer-support mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support
------------------------------------------------------------------------------
See everything from the browser to the database with AppDynamics
Get end-to-end visibility with application monitoring from AppDynamics
Isolate bottlenecks and diagnose root cause in seconds.
Start your free trial of AppDynamics Pro today!
http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
_______________________________________________
Zenloadbalancer-support mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support
------------------------------------------------------------------------------
Get your SQL database under version control now!
Version control is standard for application code, but databases havent
caught up. So what steps can you take to put your SQL databases under
version control? Why should you start doing it? Read more to find out.
http://pubads.g.doubleclick.net/gampad/clk?id=49501711&iu=/4140/ostg.clktrk
_______________________________________________
Zenloadbalancer-support mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support
------------------------------------------------------------------------------
Get your SQL database under version control now!
Version control is standard for application code, but databases havent
caught up. So what steps can you take to put your SQL databases under
version control? Why should you start doing it? Read more to find out.
http://pubads.g.doubleclick.net/gampad/clk?id=49501711&iu=/4140/ostg.clktrk
_______________________________________________
Zenloadbalancer-support mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support
