Right now, I have two separate farms for each port depending on if its tcp or
udp traffic. So right now, I have 7 farms for the different ports, I didn't add
them together. I didn't quite understand your second part.
Thanks.
From: Emilio Campos [mailto:[email protected]]
Sent: Thursday, September 26, 2013 9:49 AM
To: [email protected]
Subject: Re: [Zenloadbalancer-support] Setting up domain controller
withloadbalancer
For more than one port on the same farm you have to use l4 farms in other cases
it would not work because you have to configure that the same client ip goes to
the same backend when the same client run connections to different ports
Regards
El 26/09/2013 15:44, "Le, Andy" <[email protected]> escribió:
I'm testing something for a client and they recommend loadbalancer. So I have
test DC and load balancer on a vm. Both with different ip. I have test the dc
by itself and everything works fine. I setup a virtual nic for the interface.
Setup the farms for the dc traffic with port 88, 53, 389, 636, and so on. I set
the virtual port to those ports corresponding as well. Set the real ip server
configuration to that domain controller's ip address. All the farms has green
status, but when I go to test it, doesn't seem to work. I'm testing the DC
through the virtual nic. I'm using ad explorer and if I go directly to the DC
ip, works fine. If I do to the virtual nic ip, said server is not operational.
Any mis-configurations I'm missing?
------------------------------------------------------------------------------
October Webinars: Code for Performance
Free Intel webinars can help you accelerate application performance.
Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from
the latest Intel processors and coprocessors. See abstracts and register >
http://pubads.g.doubleclick.net/gampad/clk?id=60133471&iu=/4140/ostg.clktrk
_______________________________________________
Zenloadbalancer-support mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support
------------------------------------------------------------------------------
October Webinars: Code for Performance
Free Intel webinars can help you accelerate application performance.
Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from
the latest Intel processors and coprocessors. See abstracts and register >
http://pubads.g.doubleclick.net/gampad/clk?id=60133471&iu=/4140/ostg.clktrk
_______________________________________________
Zenloadbalancer-support mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support
