It is a bug, we will develop a patch and send you through this way
Thanks for your report
2013/12/5 tibz <[email protected]>
> Looking in the startup file (/etc/init.d/zenloadbalancer) I see that the
> -vhid=1 is hardcoded and not read from the config file...
>
> Probably something you forgot?
>
> tibz
>
> On 05/12/2013 13:27, tibz wrote:
> > Hello,
> >
> > I've just configured a new cluster with ZLB v3.03. During the
> > configuration, i've chosen Cluster ID = 2 because i've already another
> > ZLB v2 running on this network and using ID 1.
> >
> > Looking at the process, it looks fine (--vhid=2):
> > /usr/local/zenloadbalancer/app/ucarp/sbin/ucarp -r 2 --interface=eth0
> > --srcip=192.168.135.232 --vhid=2 --pass=secret --addr=192.168.135.230
> > --upscript=/usr/local/zenloadbalancer/app/zenlat
> >
> > The configuration file on both node is fine as well:
> >
> > root@VMWZLB004:~# cat /usr/local/zenloadbalancer/config/cluster.conf
> > MEMBERS:VMWZLB003:192.168.135.231:VMWZLB004:192.168.135.232
> > IPCLUSTER:192.168.135.230:eth0:clu
> > TYPECLUSTER:equal:UP
> > CABLE:-1
> > IDCLUSTER:2
> > DEADRATIO:2
> >
> >
> > However, when I reboot a node (nevermind which one) the carp process
> > start with --vhid=1, so it doesnt seems to take care of what's in the
> > config file (it also does not consider the deadratio as I do not see the
> > "-r 2" parameter in the command line)
> > /usr/local/zenloadbalancer/app/ucarp/sbin/ucarp --interface=eth0
> > --srcip=192.168.135.232 --vhid=1 --pass=secret --addr=192.168.135.230
> > --upscript=/usr/local/zenloadbalancer/app/zenlatency/z
> >
> > Restarting zenloadbalancer (/etc/init.d/zenloadbalancer restart) does
> > not help. The only way to restore the situation is to go on the master
> > node, click "Save" under Dead Ratio and then click "Configure cluster
> > type" and let it finish the cluster config process again.
> >
> > Can you please help with a fix to make sure the cluster.conf is read
> > correctly uppon startup ?
> >
> > Thanks
> > tibz
> >
> >
> ------------------------------------------------------------------------------
> > Sponsored by Intel(R) XDK
> > Develop, test and display web and hybrid apps with a single code base.
> > Download it for free now!
> >
> http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk
> > _______________________________________________
> > Zenloadbalancer-support mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support
>
>
>
> ------------------------------------------------------------------------------
> Sponsored by Intel(R) XDK
> Develop, test and display web and hybrid apps with a single code base.
> Download it for free now!
>
> http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk
> _______________________________________________
> Zenloadbalancer-support mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support
>
--
Load balancer distribution - Open Source Project
http://www.zenloadbalancer.com
Distribution list (subscribe): [email protected]
------------------------------------------------------------------------------
Sponsored by Intel(R) XDK
Develop, test and display web and hybrid apps with a single code base.
Download it for free now!
http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk
_______________________________________________
Zenloadbalancer-support mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support
