Hello ZenAdmins,
We are using Zen LB v3.0.3 opensource in a 2 node cluster. Due to heavy
load in the application traffic, we want to isolate the cluster traffic in
a separate ethernet interface (eth1). For achieving this setup, we
provisioned a Virtual NIC in both the VM servers and configured it as eth1
interface.
The IP addresses for the interfaces are as listed below:
eth0 : 192.168.1.2 (LB1 Mgmt IP)
eth1 : 192.168.1.6 (LB1)
eth0 : 192.168.1.3 (LB2 Mgmt IP)
eth1 : 192.168.1.7 (LB2)
eth0:1 : 192.168.1.5 (Farm IP for appln loadbalancing)
eth1:1 : 192.168.1.8 (For cluster)
Whenever, I try to configure the cluster in "eth1:1" interface the IP
addresses of LB2 (192.168.1.3 & 192.168.1.7) goes down. However, I can
configure the cluster in "eth0:1" interface.
Any idea if the cluster setup configuration can be achieved using "eth1:1"
interface?
Thanks
Sathish
------------------------------------------------------------------------------
Learn Graph Databases - Download FREE O'Reilly Book
"Graph Databases" is the definitive new guide to graph databases and their
applications. Written by three acclaimed leaders in the field,
this first edition is now available. Download your free book today!
http://p.sf.net/sfu/NeoTech
_______________________________________________
Zenloadbalancer-support mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support
