Hey Christopher,
Is there anything interesting in your zenperfsnmp.log?
$ less $ZEHOME/log/zenperfsnmp.log
-Eric
Christopher Brazier wrote:
Ive tried restaring the services and waiting, but no luck. Ive had the
devices added for about a week now and its still not showing anything.
The applicance has been restarted a few times over the week as well. Any
other ideas? Maybe there is something I need to enable on Windows or
Zenoss from the base installs? (The servers are definatly added into
/Servers/Windows).
Cheers guys.
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Eric Newton
Sent: 27 November 2006 14:42
To: General discussion of using zenoss system
Subject: Re: [zenoss-users] Base Windows Monitoring Setup[Scanned]
This may explain the problem:
http://dev.zenoss.org/trac/wiki/FAQ#IjustaddedsomedeviceswhydontIseeanyp
erformancegraphs
-Eric
Christopher Brazier wrote:
Hi All,
I am trying out using Zenoss to eventually monitor about 50-100
windows based servers. I have downloaded and run the VMware Appliance,
connected to it, and tried adding a Windows 2003 SBS Server (brand new
fresh build on a test box). Before adding the server, I made sure
there was SNMP service enabled on it, and there was a public RO
community and a private RW communtity. After adding the server, things
like the IP addresses, routing tables, etc came up fine. (so SNMP is
working) However things like uptime, disk space remaining, and all the
Perf information did not.
To best describe it, It is looking like the sample windows server is
in the quick tour (http://www.zenoss.com/product/tour/sample_os).
My question is, how do I enable all the things such as uptime, disk
space, etc, so after adding a server it looks like it does in the
Administators Guide? I have tried installing smnp informant standard
on the server, deleting it out of zenoss and readding it, but with no
effect. And from what I can tell from a MIB browser, the information
is there on the server to be collected.
I have tired looking through all the documentation on the website, and
had a quick flip through the mailing list archives and google, but
could come up with nothing. According to the administrators guide, all
you need to do is enable the SNMP service on the windows box.
Please bare in mind this is a fresh Windows 2003 install and a fresh
Zenoss Applicance download.
Many thanks in advance,
Chris
----------------------------------------------------------------------
--
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
