Hi Michael,
This "*100" is only necessary if SNMP is lying about the speed of the
interface. Have you determined that is the problem?
If you don't restart zenperfsnmp, you will have to wait a config cycle
for the updates to take effect.
-Eric
Michael Dye wrote:
I just installed from svn -> version 1.1.0 r3718 and am having the
following issue on multiple linux/firewall interfaces.
Basically what I am seeing is events coming in with the following info:
dedupid pfsense.local|rl0|/Perf/Interface|.1.3.6.1.2.1.2.2.1.10.1|3
evid 0a1f416d34d490c6fffff15
device pfsense.local
component rl0
eventClass /Perf/Interface
eventKey .1.3.6.1.2.1.2.2.1.10.1
summary pfsense.local Utilization 75 perc threshold of 937500000.0
exceeded: current value 2098524805.00
message
pfsense.local Utilization 75 perc threshold of 937500000.0 exceeded:
current value 2080329734.00
severity
I made the following modification of the value in PerfConf ->
Utilization 75 Perc:
(here.speed*100) / 8 * .75 instead of here.speed / 8 * .75
I assume that is the value for 100mbit, and would need to be increased
for a gbit link if I had the same issue?
But I am still seeing the error. Is anyone else having this issue?
Am I missing something here? If so please pardon the ignorance.
Thanks!
Mike
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
